DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

H7805BA データシートの表示(PDF) - Hi-Sincerity Microelectronics

部品番号
コンポーネント説明
メーカー
H7805BA
Hi-Sincerity
Hi-Sincerity Microelectronics Hi-Sincerity
H7805BA Datasheet PDF : 3 Pages
1 2 3
HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : HE6549
Issued Date : 1992.11.25
Revised Date : 2001.11.29
Page No. : 1/3
H7805AA
H7805BA
3-TERMINAL POSITIVE VOLTAGE REGULATOR
Description
These regulators employ internal current-limiting and thermal-
shutdown, making them essentially indestructible. They can deliver
up to 100mA output current. if the case temperature can keep in Tc=25°C.
TO-92
They are intended as fixed voltage regulators in a wide range of applications including local
(on-card) regulation for elimination of noise and distribution problems associated with single-point
regulation. In addition, they can be used with power pass elements to make high-current voltage
regulators. The H7805_A used as a Zener diode/resistor combination replacement, offers an
effective output impedance improvement of typically two orders of magnitude, along with lower
quiescent current and lower noise.
Absolute Maximum Ratings (Ta=25°C)
Input Voltage....................................................................................................................... 35 V
Total Power Dissipation..................................................................................... Internally limited
Operating Temperature Range .......................................................................... 0 °C to +125 °C
Maximum Junction Temperature...................................................................................... 125 °C
Storage Temperature Range........................................................................... -55 °C to +150 °C
Lead Temperature (Soldering 10S).................................................................................. 260 °C
Typical Application
Schematic Diagram
Vin
Vout
H7805_A
C1
C2
Note:
C1 and C2 are required if regulator is
located far from power supply filter
and load, or oscillation may induced
on the loop.
576
3.41k
3.89k
13k
7.8k
Vin
5k
5.7k
100
5pF
100
1.5k
1.9k
Vout
2.23k
2.84k
Gnd
H7805AA, H7805BA
HSMC Product Specification

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]