TMP88CM38AFG データシートの表示（PDF） - Toshiba

部品番号

コンポーネント説明

メーカー

TMP88CM38AFG

CMOS 8-Bit Microcontroller

Toshiba 

TMP88CS38/CM38A/CP38A

Pin Functions (1/2)

Pin Name

P20 ( INT5 / STOP )

P35 (SDA0)

P34 (SCL0)

P33 (TC4/VIN0)

P32 (VIN1/CSIN)

P31 (INT4/TC3)

P30 (INT3/RXIN)

P47 ( PWM7 )

P46 ( PWM6 )

P45 ( PWM5 )

P44 ( PWM4 )

P43 ( PWM3 )

P42 ( PWM2 )

P41 ( PWM1 )

P40 ( PWM0 )

P57 (I)

P56 ( KWU3 /AIN3)

P55 ( KWU2 /AIN2)

P54 ( KWU1 /AIN1)

P53 ( KWU0 /AIN0/TC1

/INT2/ SCK1 )

P52 (SDA1/SO1)

P51 ( PWM9 /SCL1/SI1)

P50 ( PWM8 /TC2/ INT0 )

P67 (Y/BL)

P66 (B)

P65 (G)

P64 (R)

P63 (RIN)

P62 (GIN/CSOUT)

P61 ( KWU5 /BIN/AIN5)

P60

( KWU4 /YBLIN/AIN4)

I/O

Function

I/O (Input)

I/O (Input/Output)

I/O (Input/Output)

I/O (Input)

I/O (Input)

I/O (Input)

I/O (Input)

1-bit input/output port with latch. When

used as an input port, the latch must be

set to “1”.

External interrupt input 5 or STOP

mode release signal input

I2C bus serial data input/output 0

6-bit programmable input/output port. I2C bus serial clock input/output 0

Each bit of these ports can be Timer counter input 4 or video signal

individually configured as an input or Input 0

an output under software control. Video signal input 1 or composite sync

During reset, all bits are configured as input

inputs. When used as a serial bus

interface input/output, the latch must

be set to “1”.

External interrupt input 4 or timer

counter input 3

External interrupt input 3 or remote

control signal preprocessor input

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

8-bit programmable input/output port.

Each bit of these ports can be

7-bit DA conversion (PWM) outputs

individually configured as an input or

an output under software control.

During reset, all bits are configured as 12-bit DA conversion (PWM) outputs

inputs. When used as a PWM output,

the latch must be set to “1”.

14/12-bit DA conversion (PWM)

outputs

I/O (Output)

Translucent signal output

I/O (Input)

I/O (Input)

I/O (Input)

I/O (Input /Input/Input

/Input/Output)

I/O (Input/Output

/Output)

I/O (Output/Input/Output

/Input)

8-bit programmable input/output port.

Each bit of these ports can be

individually configured as an input or

an output under software control.

During reset, all bits are configured as

inputs. When used as a PWM output, a

serial bus interface input/output, the

latch must be set to “1”.

Key-on wakeup inputs or AD converter

analog inputs

Key-on wakeup input or AD converter

analog input or timer counter input 1 or

external interrupt input 2 or SIO serial

clock input/output 1

I2C bus serial data input/output 1 or

SIO serial data output 1

7-bit DA conversion (PWM) output or

I2C bus serial data input/output 1 or

SIO serial data input 1

I/O

(Output/Input /Input)

7-bit DA conversion (PWM) output or

timer counter input 2 or external

interrupt input 0

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Output)

I/O (Input)

I/O (Input/Output)

I/O (Input)

I/O (Input)

Y or BL output

8-bit programmable input/output port.

(P67 to P64: Tri-State, P63 to P60:

High current output) Each bit of these R/G/B outputs

ports can be individually configured as

an input or an output under software R input

control. During reset, all bits are G input or TEST video signal output

configured as inputs. When used P64

to P67 as port, each bit of the P6 port Key-on wakeup input 5 or B input or AD

data selection register (Bit7 to 4 in converter analog input 5

ORP6S) must be set to “1”.

Key-on wakeup input 4 or Y/BL input or

AD converter analog input 4

88CS38-4

2007-09-12

Share Link: