B32686A
Very high pulse (wound)
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k0 values
Lead spacing
VR (V DC)
1000
VRMS (V AC)
400
1250
450
1600
450
2000
500
37.5 mm
dV/dt in V/µs
2 000
2 800
3 500
4 500
k0 in V2/µs
4 000 000
7 000 000
11 000 000
18 000 000
Impedance Z versus frequency f
(typical values)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 18