P6SMBJ54 データシートの表示（PDF） - Transys Electronics Limited
部品番号
コンポーネント説明
メーカー
P6SMBJ54 Datasheet PDF : 5 Pages
| |||
P6SMBJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 TO 170 Volts Peak Power Pulse - 600Watt
FEATURES
l For surface mounted applications in order to
optimize board space
l Low profile package
l Built-in strain relief
l Glass passivated junction
l Low inductance
l Excellent clamping capability
l Repetition Rate(duty cycle):0.01%
l Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
l Typical ID less than 1 A above 10V
l High temperature soldering :
260 /10 seconds at terminals
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
SMB/DO-214AA
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
over passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes positive end(cathode)
except Bidirectional
Standard packaging:12 mm tape per(EIA 481)
Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Peak Pulse Power Dissipation on 10/1000 s waveform
(Note 1,2,Fig 1)
Peak Pulse Current on 10/1000 s waveform
(Note 1,Fig 3)
Peak forward Surge Current 8.3ms single half sine-wave
superimposed on rated load(JEDEC Method) (Note 2,3)
Operating Junction and Storage Temperature Range
SYMBOL
PPPM
IPPM
IFSM
TJ,TSTG
VALUE
Minimum 600
See Table 1
100.0
-55 to +150
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 per Fig. 2.
UNITS
Watts
Amps
Amps
Share Link: 