LM25115 データシートの表示（PDF） - National ->Texas Instruments

部品番号

コンポーネント説明

メーカー

LM25115

Secondary Side Post Regulator Controller

National ->Texas Instruments 

November 2005

LM25115

Secondary Side Post Regulator Controller

General Description

The LM25115 controller contains all of the features neces-

sary to implement multiple output power converters utilizing

the Secondary Side Post Regulation (SSPR) technique. The

SSPR technique develops a highly efficient and well regu-

lated auxiliary output from the secondary side switching

waveform of an isolated power converter. Regulation of the

auxiliary output voltage is achieved by leading edge pulse

width modulation (PWM) of the main channel duty cycle.

Leading edge modulation is compatible with either current

mode or voltage mode control of the main output. The

LM25115 drives external high side and low side NMOS

power switches configured as a synchronous buck regulator.

A current sense amplifier provides overload protection and

operates over a wide common mode input range. Additional

features include a low dropout (LDO) bias regulator, error

amplifier, precision reference, adaptive dead time control of

the gate signals and thermal shutdown.

Features

n Self-synchronization to main channel output

n Free-run mode for buck regulation of DC input

n Leading edge pulse width modulation

n Voltage-mode control with current injection and input line

feed-forward

n Operates from AC or DC input up to 42V

n Wide 4.5V to 30V bias supply range

n Wide 0.75V to 13.5V output range.

n Top and bottom gate drivers sink 2.5A peak

n Adaptive gate driver dead-time control

n Wide bandwidth error amplifier (4MHz)

n Programmable soft-start

n Thermal shutdown protection

n TSSOP-16 or thermally enhanced LLP-16 packages

Typical Application Circuit

FIGURE 1. Simplified Multiple Output Power Converter Utilizing SSPR Technique

20172601

© 2005 National Semiconductor Corporation DS201726

www.national.com

Share Link: