DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ASCELL3912 データシートの表示(PDF) - austriamicrosystems AG

部品番号
コンポーネント説明
メーカー
ASCELL3912
AMSCO
austriamicrosystems AG AMSCO
ASCELL3912 Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ISM 868 MHz, 433 MHz and 315 MHz FSK Receiver Cell – Preliminary Data Sheet
ASCell3912
Austria Mikro Systeme International AG
Key Features
Supports triple band operation: Europe 868 MHz and 433 MHz-, US and Japan 315 MHz ISM
band.
Designed to be conform to EN 300 220, and FCC 47 CFR Ch.1 par.15 requirements.
Provides highly reliable packet oriented data transmission in blocks of 128 bit.
Event oriented single message transmission and status oriented and continuous message
transmission supported.
Special transmission protocol for high reliability even in presence of burst interferer (e.g.
GSM) implemented.
RX sensitivity of the receiver typical -100 dBm.
Supports clock for an external µC and allows clock free total shut down of the whole system.
Wide supply range between 2.7 to 5.5 V.
Low RX current, typical 10 mA @ 2.4 V.
Low idle mode current, typical 1.2mA.
Wide operating temperature range from –40 °C to +85 °C.
Only a low cost XTAL for 25 ppm (868 MHz) or 50 ppm (433 and 315 MHz) reference fre-
quency tolerance required.
Minimum only 1 XTAL and 4 capacitors externally required.
General Description
The ASCell3912 is a low power, triple ISM band (868 / 433 / 315 MHz), single channel FSK re-
ceiver designed to work in a remote control link together with the SC3911 transmitter system
cell.
The ASCell3912 performs packet oriented data transmission, in a single message- or continuos-
message mode using a special protocol to ensure high reliability even in presence of strong
pulsed interferers in close adjacent bands like e.g. GSM.
A general bi-directional micro-controller (µC) interface is provided, to support the µC with clock-
and reset- signal, and to operate the highly efficient power up/down management.
As external components the SC3911 need at minimum only a reference XTAL, and 4 capacitors.
Applications
Key-less car entry systems.
Short range packet oriented data transmission.
Security applications and alarm systems.
Domestic remote control systems.
Industrial remote control systems.
Remote metering.
Rev. A, February 2000
Page 2 of 14

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]