DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SMCJ54 データシートの表示(PDF) - Jiangsu Yutai Electronics Co., Ltd

部品番号
コンポーネント説明
メーカー
SMCJ54
CHENDA
Jiangsu Yutai Electronics Co., Ltd CHENDA
SMCJ54 Datasheet PDF : 5 Pages
1 2 3 4 5
SMCJ5.0 THRU SMCJ440CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage: 5.0-440 Volts Peak pulse power: 1500 Watts
0.126 (3.20)
0.114 (2.90)
0.103(2.62)
0.079(2.06)
DO-214AB/SMC
0.280(7.11)
0.260(6.60)
0.245(6.22)
0.220(5.59)
0.012(0.305)
0.006(0.152)
FEATURE
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
1500W peak pulse power capability at 10/1000μs waveform,
repetition rate (duty cycle): 0.01%
Fast response time
Typical IR less than 1μA above 10V
High Temperature soldering: 260/10 seconds at terminals
Plastic package has underwriters laboratory flammability 94V-0
0.060(1.52)
0.030(0.76)
0.008(0.203)MAX.
0.320(8.13)
0.305(7.75)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-214AA. Molded plastic over glass passivated junction
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode except bi-directional models
Standard Packaging: 12mm tape (EIA STD RS-481)
Weight: 0.10g
APPLICATIONS
I/O interface
AC/DC power supply
Low frequency signal transmission line (RS232, RS485, etc.)
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified.
Peak pulse power dissipation at 10/1000μs waveform
(Note1, Note2, Fig.1)
PPPM
Minimum 1500 Watts
Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)
IPPM
See Table
Amps
Steady state power dissipation at TA=50(Fig.5)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load, (JEDEC Method) (Note3, Fig.6)
PM(AV)
IFSM
6.5
200
Watts
Amps
Operating junction and Storage Temperature Range.
TJ,TSTG
-65 to +150
Typical thermal resistance junction to lead
RθJL
15
/W
Typical thermal resistance junction to ambient
RθJA
75
/W
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2.
2. Mounted on 5.0mm×5.0mm (0.03mm thick) copper pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]