ATA6612C データシートの表示（PDF） - Atmel Corporation
部品番号
コンポーネント説明
メーカー
ATA6612C
Atmel Corporation
ATA6612C Datasheet PDF : 312 Pages
| |||
Table 2-2. Maximum Ratings of the LIN-SBC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Parameters
Supply voltage VS
Pulse time ≤ 500ms; Ta = 25°C
Output current IVCC ≤ 85mA
Pulse time ≤ 2min; Ta = 25°C
Output current IVCC ≤ 85mA
WAKE (with 33kΩ serial resistor)
KL_15 (with 47kΩ/100nF)
DC voltage
Transient voltage due to ISO7637 (coupling
1nF)
INH
- DC voltage
LIN
- DC voltage
Logic pins (RxD, TxD, EN, NRES, NTRIG,
WD_OSC, MODE, TM)
Output current NRES
PVCC DC voltage
VCC DC voltage
Symbol
VS
VS
VS
INRES
Min.
–0.3
–1
–150
–0.3
–27
–0.3
–0.3
–0.3
Typ.
Max.
Unit
+40
V
+40
V
27
V
+40
V
+100
V
VS + 0.3
V
+40
V
+5.5
V
+2
mA
+5.5
V
+6.5
V
Table 2-3. Maximum Ratings of the Microcontroller
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Parameters
Symbol
Voltage on any pin except RESET with respect
to ground
Voltage on RESET with respect to ground
Maximum operating voltage
DC current per I/O pin
DC current MCUVCC and GND pins
Injection current at MCUVCC = 0V(1)
Injection current at MCUVCC = 5V
Note: 1. Maximum current per port = ±30mA
Min.
–0.5
–0.5
Typ.
Max.
Unit
MCUVCC +
0.5
V
13.0
V
6.0
V
40.0
mA
200.0
mA
±5.0
mA
±1.0
mA
6
ATA6612C/ATA6613C [DATASHEET]
9111L–AUTO–11/14
Share Link: