Switching Waveforms
FIGURE 1. Data to Output Propagation Delay
Test Circuit
FIGURE 2. Enable/Disable Propagation Delay
Notes:
GND = 0V, ECL VCC = +5V, TTL VCC = +5V
L1 and L2 = equal length 50Ω impedance lines
50Ω terminators are internal to S/H measurement unit
Decoupling 0.1 µF from GND to ECL VCC and TTL VCC
All unused outputs are loaded with 500Ω to GND
CL = Fixture and stray capacitance = 50 pF
Switch S1 is open for tPLH, tPHL, tPHZ and tPZH tests
Switch S1 is closed only for tPLZ and tPZL tests
FIGURE 3. AC Test Circuit
5
www.fairchildsemi.com