TDA7499
MUTE/STAND-BY FUNCTION
LINEAR INTEGRATED CIRCUIT
MUTE/STAND-BY function is assembled at pin 5 and to control the amplifier status by two different thresholds,
referred to +VS.
− When Vpin5 higher than = +VS - 2.5V the amplifier is in Stand-by mode and the final stage generators are off
− When Vpin5 is between +VS - 2.5V and +VS - 6V the final stage current generators are switched on and the
amplifier is in mute mode
− When Vpin5 is lower than +VS - 6V the amplifier is play mode.
TYPICAL APPLICATION CIRCUIT
SINGLE SUPPLY APPLICATION
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 5
QW-R107-032.B