STM32F301C6(2014) データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

STM32F301C6
(Rev.:2014)

ARM® Cortex®-M4 32-bit MCU+FPU, up to 64 KB Flash, 16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 – 3.6 V

STMicroelectronics 

STM32F301x6 STM32F301x8

ARM® Cortex®-M4 32-bit MCU+FPU, up to 64 KB Flash,

16 KB SRAM, ADC, DAC, COMP, Op-Amp, 2.0 – 3.6 V

Datasheet - production data

Features

 Core: ARM 32-bit Cortex-M4 CPU with FPU

(72 MHz max.), single-cycle multiplication and

HW division, DSP instruction

 Memories

– 32 to 64 Kbyte of Flash memory

– 16 Kbyte of SRAM on data bus

 CRC calculation unit

 Reset and power management

– VDD, VDDA voltage range: 2.0 to 3.6 V

– Power-on/Power down reset (POR/PDR)

– Programmable voltage detector (PVD)

– Low-power: Sleep, Stop, and Standby

– VBAT supply for RTC and backup registers

 Clock management

– 4 to 32 MHz crystal oscillator

– 32 kHz oscillator for RTC with calibration

– Internal 8 MHz RC with x 16 PLL option

– Internal 40 kHz oscillator

 Up to 51 fast I/O ports, all mappable on

external interrupt vectors, several 5 V-tolerant

 Interconnect matrix

 7-channel DMA controller supporting timers,

ADCs, SPIs, I2Cs, USARTs and DAC

 1 × ADC 0.20 μs (up to 15 channels) with

selectable resolution of 12/10/8/6 bits, 0 to

3.6 V conversion range, single

ended/differential mode, separate analog

supply from 2.0 to 3.6 V

 Temperature sensor

 1 x 12-bit DAC channel with analog supply from

2.4 to 3.6 V

 Three fast rail-to-rail analog comparators with

analog supply from 2.0 to 3.6 V

 1 x operational amplifier that can be used in

PGA mode, all terminal accessible with analog

supply from 2.4 to 3.6 V

LQFP48 (7 x 7 mm)

LQFP64 (10 x 10 mm)

UFQFPN32

(5 x 5 mm)

WLCSP49

(3.4 x 3.4 mm)

 Up to 18 capacitive sensing channels

supporting touchkey, linear and rotary sensors

 Up to 9 timers

– One 32-bit timer with up to 4 IC/OC/PWM

or pulse counter and quadrature

(incremental) encoder input

– One 16-bit 6-channel advanced-control

timer, with up to 6 PWM channels,

deadtime generation and emergency stop

– Three 16-bit timers with IC/OC/OCN or

PWM, deadtime gen. and emergency stop

– One 16-bit basic timer to drive the DAC

– 2 watchdog timers (independent, window)

– SysTick timer: 24-bit downcounter

 Calendar RTC with alarm, periodic wakeup

from Stop/Standby

 Communication interfaces

– Three I2Cs with 20 mA current sink to

support Fast mode plus

– Up to 3 USARTs, 1 with ISO 7816 I/F,

autobaudrate detect and Dual clock

domain

– Up to two SPIs with multiplexed full duplex

I2S

– Infrared transmitter

 Serial wire debug (SWD), JTAG

 96-bit unique ID

Table 1. Device summary

Reference

STM32F301x6

STM32F301x8

Part number

STM32F301R6, STM32F301C6, STM32F301K6

STM32F301R8, STM32F301C8, STM32F301K8

December 2014

This is information on a product in full production.

DocID025146 Rev 3

1/132

www.st.com

Share Link: