AT28C16-W データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

AT28C16-W

16K (2K x 8) CMOS E2PROM

Atmel Corporation 

Description (Continued)

internally, freeing the microprocessor address and data

bus for other operations. Following the initiation of a write

cycle, the device will go to a busy state and automatically

clear and write the latched data using an internal control

timer. The end of a write cycle can be determined by

DATA POLLING of I/O7. Once the end of a write cycle has

been detected, a new access for a read or a write can

begin.

The CMOS technology offers fast access times of 150 ns

at low power dissipation. When the chip is deselected the

standby current is less than 100 µA.

Atmel’s 28C16 has additional features to ensure high

quality and manufacturability. The device utilizes error cor-

rection internally for extended endurance and for im-

proved data retention characteristics. An extra 32-bytes of

E2PROM are available for device identification or tracking.

Block Diagram

Absolute Maximum Ratings*

Temperature Under Bias................. -55°C to +125°C

Storage Temperature...................... -65°C to +150°C

All Input Voltages

(including NC Pins)

with Respect to Ground ................... -0.6V to +6.25V

All Output Voltages

with Respect to Ground .............-0.6V to VCC + 0.6V

Voltage on OE and A9

with Respect to Ground ................... -0.6V to +13.5V

*NOTICE: Stresses beyond those listed under “Absolute Maxi-

mum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the

device at these or any other conditions beyond those indi-

cated in the operational sections of this specification is not

implied. Exposure to absolute maximum rating conditions

for extended periods may affect device reliability.

2-166

AT28C16

Share Link: