TISP7070H3SL データシートの表示（PDF） - Power Innovations
部品番号
コンポーネント説明
メーカー
TISP7070H3SL Datasheet PDF : 14 Pages
| |||
TISP7070H3SL THRU TISP7095H3SL, TISP7125H3SL THRU TISP7210H3SL
TISP7250H3SL THRU TISP7400H3SL
TRIPLE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
Copyright © 2000, Power Innovations Limited, UK
MARCH 1999 - REVISED MARCH 2000
TELECOMMUNICATION SYSTEM 2x100 A 10/1000 OVERVOLTAGE PROTECTORS
G Ion-Implanted Breakdown Region
- Precise DC and Dynamic Voltages
SL PACKAGE
(TOP VIEW)
DEVICE
‘7070
‘7080
‘7095
‘7125
‘7135
‘7145
‘7180
‘7210
‘7250
‘7290
‘7350
‘7400
VDRM
V
58
65
75
100
110
120
145
160
200
230
275
300
V(BO)
V
70
80
95
125
135
145
180
210
250
290
350
400
T
1
G
2
R
3
device symbol
T
MDXXAGA
R
G Rated for International Surge Wave Shapes
- Single and Simultaneous Impulses
WAVE SHAPE
STANDARD
ITSP
A
2/10 µs
GR-1089-CORE 500
8/20 µs
IEC 61000-4-5 350
10/160 µs
FCC Part 68
250
10/700 µs
FCC Part 68
200
ITU-T K20/21
10/560 µs
FCC Part 68
130
10/1000 µs
GR-1089-CORE 100
SD7XAB
G
Terminals T, R and G correspond to the
alternative line designators of A, B and C
G 3-Pin Through-Hole Packaging
- Compatible with TO-220AB pin-out
- Low Height. . . . . . . . . . . . . . . . . . . . .8.3 mm
description
The TISP7xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground.
Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or
conducted on to the telephone line.
Each terminal pair, T-G, R-G and T-R, has a symmetrical voltage-triggered bidirectional thyristor protection
characteristic. Overvoltages are initially clipped by breakdown clamping until the voltage rises to the
breakover level, which causes the device to crowbar into a low-voltage on state. This low-voltage on state
causes the current resulting from the overvoltage to be safely diverted through the device. The high crowbar
holding current prevents d.c. latchup as the diverted current subsides.
This TISP7xxxH3SL range consists of twelve voltage variants to meet various maximum system voltage
levels (58 V to 300 V). They are guaranteed to voltage limit and withstand the listed international lightning
surges in both polarities. These high current protection devices are in a 3-pin single-in-line (SL) plastic
package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in
SL packaged protectors, consult the factory. For lower rated impulse currents in the SL package, the 45 A
10/1000 TISP7xxxF3SL series is available.
These monolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and
matched breakover control and are virtually transparent to the system in normal operation
PRODUCT INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1
Share Link: 