AXK5F80347YG_ データシートの表示（PDF） - Panasonic Corporation

部品番号

コンポーネント説明

メーカー

AXK5F80347YG_

NARROW-PITCH CONNECTORS FOR BOARD-TO-BOARD CONNECTION

Panasonic Corporation 

AXK(5/6)F

NOTES

1. As shown below, excess force

during insertion may result in damage

to the connector or removal of the

solder. Please be careful. Also, to

prevent connector damage please

confirm the correct position before

mating connectors.

• Socket

Recommended PC board pattern

(TOP VIEW)

0.50±0.05

B±0.05

0.50±0.05

0.25±0.05

• Header

Recommended PC board pattern

(TOP VIEW)

0.50±0.05

B±0.05

0.50±0.05

0.25±0.05

2. Keep the PC board warp no more

than 0.03 mm in relation to the overall

length of the connector.

Max. 0.03mm

Max. 0.03mm

3. PC Boards and Recommended

Metal Mask Patterns

Connectors are mounted with high

density, with a pitch interval of 0.4 to 0.5

mm. It is therefore necessary to make

sure that the right levels of solder are

used, in order to reduce solder bridge

and other issues. The figures to the right

are recommended metal mask patterns.

Please use them as a reference.

0.125±0.05

0.30±0.05

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 56%)

B±0.01

0.50±0.01

0.50±0.01

0.23±0.01

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Opening area ratio: 69%)

B±0.01

0.50±0.01

0.50±0.01

0.23±0.01

0.125±0.05

0.30±0.05

Recommended metal mask pattern

Metal mask thickness: Here, 150 µm

(Opening area ratio: 58%)

B±0.01

0.50±0.01

0.50±0.01

0.23±0.01

Recommended metal mask pattern

Metal mask thickness: Here, 120 µm

(Opening area ratio: 72%)

B±0.01

0.50±0.01

0.50±0.01

0.23±0.01

* See the dimension table on page 91 for more information on the B dimension of the socket and header.

For other details, please verify with

the product specification sheets.

panasonic-electric-works.net/ac

Share Link: