BTS133 データシートの表示（PDF） - Infineon Technologies
部品番号
コンポーネント説明
メーカー
BTS133 Datasheet PDF : 9 Pages
| |||
BTS 133
Maximum Ratings at Tj = 25 °C unless otherwise specified
Parameter
Symbol
Value
Unit
Drain source voltage
Drain source voltage for short circuit protection
Continuous input current 1)
-0.2V ≤ VIN ≤ 10V
VIN < -0.2V or VIN > 10V
VDS
VDS(SC)
IIN
Operating temperature
Tj
Storage temperature
Tstg
Power dissipation
Ptot
TC = 25 °C
Unclamped single pulse inductive energy
EAS
ID(ISO) = 7 A
Electrostatic discharge voltage (Human Body Model) VESD
according to MIL STD 883D, method 3015.7 and
EOS/ESD assn. standard S5.1 - 1993
60
V
32
mA
no limit
| IIN | ≤ 2
- 40 ... +150
°C
- 55 ... +150
90
W
2000
mJ
3000
V
Load dump protection VLoadDump2) = VA + VS
VLD
VIN=low or high; VA=13.5 V
td = 400 ms, RI = 2 Ω, ID=0,5*7A
90
td = 400 ms, RI = 2 Ω, ID= 7A
74
DIN humidity category, DIN 40 040
E
IEC climatic category; DIN IEC 68-1
40/150/56
Thermal resistance
junction - case:
junction - ambient:
SMD version, device on PCB: 3)
RthJC
RthJA
RthJA
1.4
K/W
75
45
1In case of thermal shutdown a minimum sensor holding current of 500 µA has to be guaranteed (see also page 3).
2VLoaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839
3 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm 2 (one layer, 70µm thick) copper area for Drain connection.
PCB mounted vertical without blown air.
Page 2
19.05.2000
Share Link: 