P5103AB データシートの表示（PDF） - Teccor Electronics

部品番号

コンポーネント説明

メーカー

P5103AB

Balanced Three-chip SIDACtor Device

Teccor Electronics 

Balanced Three-chip SIDACtor Device

Balanced Three-chip SIDACtor Device

The three-chip modified TO-220 SIDACtor balanced solid state device is designed for

1

3

telecommunication protection systems that reference Tip and Ring to earth ground.

Applications include any piece of transmission equipment that requires balanced protection.

This device is built using Teccor’s patented “Y” (US Patent 4,905,119) configuration.

2

The SIDACtor device is used to enable equipment to meet various regulatory requirements

including GR 1089, ITU K.20,K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly

known as FCC Part 68).

Electrical Parameters

Part

Number *

VDRM

VS

VDRM

VS

Volts

Volts

Volts

Volts

VT

IDRM

IS

IT

IH

CO

Pins 1-2, 2-3

Pins 1-3

Volts µAmps mAmps Amps mAmps

pF

P1553A_

130

180

130

180

8

5

800

2.2

150

40

P1803A_

150

210

150

210

8

5

800

2.2

150

40

P2103A_

170

250

170

250

8

5

800

2.2

150

40

P2353A_

200

270

200

270

8

5

800

2.2

150

40

P2703A_

230

300

230

300

8

5

800

2.2

150

30

P3203A_

270

350

270

350

8

5

800

2.2

150

30

P3403A_

300

400

300

400

8

5

800

2.2

150

30

P5103A_

420

600

420

600

8

5

800

2.2

150

30

A2106A_3 **

170

250

50

80

8

5

800

2.2

120

40

A5030A_3 **

400

550

270

350

8

5

800

2.2

150

30

* For individual “AA”, “AB”, and “AC” surge ratings, see table below.

** Asymmetrical

General Notes:

• All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.

• IPP is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• VDRM is measured at IDRM.

• VS is measured at 100 V/µs.

• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured between Pins 1-2 and 3-2 at 1 MHz with a 2 V bias and is a typical value for “AA” product. “AB”

and “AC” capacitance is approximately 2x the listed value.

• Device is designed to meet balance requirements of GTS 8700 and GR 974.

Surge Ratings

Series

A

B

C

IPP

2x10 µs

Amps

150

250

500

IPP

8x20 µs

Amps

150

250

400

IPP

10x160 µs

Amps

90

150

200

IPP

10x560 µs

Amps

50

100

150

IPP

10x1000 µs

Amps

45

80

100

ITSM

60 Hz

Amps

20

30

50

di/dt

Amps/µs

500

500

500

http://www.teccor.com

+1 972-580-7777

2 - 32

© 2002 Teccor Electronics

SIDACtor® Data Book and Design Guide

Share Link: