ADG465 データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADG465

Single Channel Protector in a SOT-23 Package and a MSOP Package

Analog Devices 

ADG465

ABSOLUTE MAXIMUM RATINGS

TA = 25°C, unless otherwise noted.

Table 2.

Parameter

VDD to VSS

VS, VD, Analog Input Overvoltage with

Power On1

VS, VD, Analog Input Overvoltage with

Power Off1

Continuous Current, S or D

Peak Current, S or D (Pulsed at 1 ms,

10% Duty Cycle Maximum)

Operating Temperature Range

Storage Temperature Range

Junction Temperature

Lead Temperature, Soldering

Vapor Phase (60 sec)

Infrared (15 sec)

Rating

44 V

VSS – 20 V to VDD + 20 V

−40 V to +40 V

20 mA

40 mA

−40°C to +85°C

−65°C to +125°C

150°C

215°C

220°C

1 The channel protector clamps overvoltages at the source (S) or the drain (D)

of the switch. See the Theory of Operation section for more information.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

Data Sheet

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 3. Thermal Resistance

Package Type

θJA

θJC

6-Lead SOT-231

230

92

8-Lead MSOP2

206

44

Unit

°C/W

°C/W

1 Thermal impedance simulated values are based on JEDEC 1S 2-layer test

board. See EIA/JEDEC standard JESD51.

2 Thermal impedance simulated values are based on JEDEC 2S2P 4-layer test

board. See EIA/JEDEC standard JESD51.

ESD CAUTION

Rev. C | Page 4 of 12

Share Link: