VNB14N0413TR(2012) データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
VNB14N0413TR Datasheet PDF : 17 Pages
| |||
VNB14N04 - VNK14N04FM - VNV14N04
3
Protection features
Protection features
During normal operation, the Input pin is electrically connected to the gate of the internal
power MOSFET. The device then behaves like a standard power MOSFET and can be used
as a switch from DC to 50 kHz. The only difference from the user’s standpoint is that a small
DC current (Iiss) flows into the Input pin in order to supply the internal circuitry.
The device integrates:
q Overvoltage clamp protection: internally set at 42 V, along with the rugged avalanche
characteristics of the Power MOSFET stage give this device unrivalled ruggedness and
energy handling capability. This feature is mainly important when driving inductive
loads.
) q Linear current limiter circuit: limits the drain current Id to Ilim whatever the Input pin
t(s voltage. When the current limiter is active, the device operates in the linear region, so
power dissipation may exceed the capability of the heatsink. Both case and junction
c temperatures increase, and if this phase lasts long enough, junction temperature may
du reach the overtemperature threshold Tjsh.
ro q Overtemperature and short circuit protection: these are based on sensing the chip
P temperature and are not dependent on the input voltage. The location of the sensing
te element on the chip in the power stage area ensures fast, accurate detection of the
junction temperature. Overtemperature cutout occurs at minimum 150 °C. The device
le is automatically restarted when the chip temperature falls below 135 °C.
so q Status feedback: in the case of an overtemperature fault condition, a Status Feedback
b is provided through the Input pin. The internal protection circuit disconnects the input
O from the gate and connects it instead to ground via an equivalent resistance of 100 Ω.
- The failure can be detected by monitoring the voltage at the Input pin, which will be
) close to ground potential.
t(s Additional features of this device are ESD protection according to the Human Body model
Obsolete Produc and the ability to be driven from a TTL Logic circuit (with a small increase in RDS(on)).
7/17
Share Link: 