HV5308 データシートの表示（PDF） - Microchip Technology
部品番号
コンポーネント説明
メーカー
HV5308
Microchip Technology
HV5308 Datasheet PDF : 17 Pages
| |||
HV5308 / HV5408
1.0 ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS†
Supply voltage, VDD .................................................................................................................................. -0.5V to +16V
Supply voltage, VPP................................................................................................................................... -0.5V to +90V
Logic input levels................................................................................................................................ -0.5V to VDD+0.5V
Ground current1 ....................................................................................................................................................... 1.5A
Continuous total power dissipation2 .................................................................................................................. 1200mW
Operating temperature range .................................................................................................................. -40°C to +85°C
Storage temperature range ................................................................................................................... -65°C to +150°C
† Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is
a stress rating only and functional operation of the device at those or any other conditions above those indicated in the
operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods
may affect device reliability.
1: Duty cycle is limited by the total power dissipated in the package.
2: For operation above 25°C ambient derate linearly to maximum operating temperature at 20mW/°C.
ELECTRICAL CHARACTERISTICS
Electrical Specifications: VPP = 60V, VDD = 12V, TA = 25°C
Parameter
Symbol
Min
DC Characteristics
VPP supply current
IDD supply current (quiescent)
IDD supply current (operating)
High level logic input current
Low level logic input current
IPP
-
IDDQ
-
IDD
-
IIH
-
IIL
-
High level output voltage
HVOUT
VOH
Data out
52
10.5
Low level output voltage
HVOUT
VOL
-
Data out
-
HV output clamp diode voltage
AC Characteristics
VOC
-
Clock frequency
fCLK
-
Clock width, High or Low
tWL or tWH
62
Setup time before CLK rises
tSU
25
Hold time after CLK rises
tH
10
Data output delay after L to H CLK tDLH (Data)
-
Data output delay after H to L CLK tDHL (Data)
-
LE delay after L to H CLK
tDLE
50
Width of LE pulse
tWLE
50
LE setup time before L to H CLK
tSLE
50
Delay from LE to HVOUT, L to H
tON
-
Delay from LE to HVOUT, H to L
tOFF
-
Note 1: L to H = Low to High; H to L = High to Low.
Max Units Conditions
0.5
mA HVOUTPUTS high to low
100
µA All inputs = VDD or GND
15
mA VDD= VDD max, fCLK= 8.0MHz
1.0
µA VIN= VDD
-1.0
µA VIN= 0
-
V
IOH= -20mA, -40 to 85°C
IOH= -15mA, -55 to 125°C
-
V IO= -100µA
8.0
V
IOL= 20mA, -40 to 85°C
IOL= 15mA, -55 to 125°C
1.0
V IO= 100µA
-1.5
V IOL= -100mA
8.0
MHz ---
-
ns ---
-
ns ---
-
ns ---
110
ns CL= 15pF, (Note 1)
110
ns CL= 15pF, (Note 1)
-
ns (Note 1)
-
ns ---
-
ns (Note 1)
500
ns (Note 1)
500
ns (Note 1)
DS20005425A-page 4
2015 Microchip Technology Inc.
Share Link: