DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC-4516CD64PS データシートの表示(PDF) - NEC => Renesas Technology

部品番号
コンポーネント説明
メーカー
MC-4516CD64PS
NEC
NEC => Renesas Technology NEC
MC-4516CD64PS Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
MC-4516CD64ES, 4516CD64PS
5 DC Characteristics (Recommended Operating Conditions unless otherwise noted)
Parameter
Symbol
Test condition
MIN. MAX. Unit Notes
Operating current
Precharge standby current in
power down mode
Precharge standby current in
non power down mode
Active standby current in
power down mode
Active standby current in
non power down mode
Operating current
(Burst mode)
CBR (Auto) refresh current
ICC1 Burst length = 1, tRC tRC(MIN.)
/CAS latency = 2
/CAS latency = 3
ICC2P CKE VIL(MAX.), tCK = 15 ns
ICC2PS CKE VIL(MAX.), tCK =
ICC2N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
Input signals are changed one time during 30 ns.
ICC2NS CKE VIH(MIN.), tCK = , Input signals are stable.
ICC3P CKE VIL(MAX.), tCK = 15 ns
ICC3PS CKE VIL(MAX.), tCK =
ICC3N CKE VIH(MIN.), tCK = 15 ns, /CS VIH(MIN.),
Input signals are changed one time during 30 ns.
ICC3NS CKE VIH(MIN.), tCK = , Input signals are stable.
ICC4 tCK tCK(MIN.), IO = 0 mA
/CAS latency = 2
/CAS latency = 3
ICC5
tRC tRC(MIN.)
/CAS latency = 2
560
mA
1
560
8
mA
8
160
mA
64
40
mA
32
240
mA
160
520
mA
2
680
1,000 mA
3
Self refresh current
Input leakage current
Output leakage current
/CAS latency = 3
1,000
ICC6 CKE 0.2 V
16
mA
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
–8
+8
µA
IO(L) DOUT is disabled, VO = 0 to 3.6 V
–3
+3
µA
High level output voltage
Low level output voltage
VOH IO = – 4.0 mA
VOL IO = + 4.0 mA
2.4
V
0.4
V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK(MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK(MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK(MIN.).
6
Data Sheet M13612EJ5V0DS00

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]