DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SMDJ11A データシートの表示(PDF) - Jiangsu Yutai Electronics Co., Ltd

部品番号
コンポーネント説明
メーカー
SMDJ11A
CHENDA
Jiangsu Yutai Electronics Co., Ltd CHENDA
SMDJ11A Datasheet PDF : 5 Pages
1 2 3 4 5
SMDJ Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage: 5.0-170 Volts Peak pulse power: 3000 Watts
0.126 (3.20)
0.114 (2.90)
0.103(2.62)
0.079(2.06)
DO-214AB/SMC
0.280(7.11)
0.260(6.60)
0.245(6.22)
0.220(5.59)
0.012(0.305)
0.006(0.152)
FEATURE
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
3000W peak pulse power capability at 10/1000μs waveform,
repetition rate (duty cycle): 0.01%
Fast response time
Typical IR less than 2μA above 12V
High Temperature soldering: 260/10 seconds at terminals
Plastic package has underwriters laboratory flammability 94V-0
0.060(1.52)
0.030(0.76)
0.008(0.203)MAX.
0.320(8.13)
0.305(7.75)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case: JEDEC DO-214AB. Molded plastic over glass passivated junction
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode except bi-directional models
Standard Packaging: 12mm tape (EIA STD RS-481)
APPLICATIONS
I/O interface
AC/DC power supply
Low frequency signal transmission line (RS232, RS485, etc.)
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified.
Peak pulse power dissipation at 10/1000μs waveform
(Note1, Note2 )
Maximum Instantaneous Forward Voltage at
100A for Unidirectional only
PPPM
VF
3000
3.5
Steady state power dissipation at TA=50
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load, (JEDEC Method) (N ote3 )
PM(AV)
IFSM
Operating junction and Storage Temperature Range.
TJ,TSTG
Typical thermal resistance junction to lead
RθJL
Typical thermal resistance junction to ambient
RθJA
Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
6.5
300
-65 to +150
15
75
Watts
Volts
Watts
Amps
/W
/W

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]