HFBR-0541Z データシートの表示（PDF） - Avago Technologies

部品番号

コンポーネント説明

メーカー

HFBR-0541Z

Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications

Avago Technologies 

HFBR-1505AZ/2505AZ (SMA Tx/Rx for SERCOS)

HFBR-1515BZ/2515BZ (ST® Tx/Rx for PROFIBUS)

HFBR-1505CZ/2505CZ (SMA Tx/Rx for INTERBUS-S)

Fiber Optic Transmitters and Receivers

for SERCOS, PROFIBUS and INTERBUS-S Applications

Data Sheet

Description

SERCOS

SERCOS, an acronym for SErial Realtime COmmunications

System, is a standard digital interface for communication

in industrial CNC applications. SERCOS is a European (EN

61491) and international standard (IEC 61491). The optical

interface allows data rates of 2, 4, 8, and 16 MBd and data

transfer between numerical controls and drives via fiber-

optic rings, with voltage isolation and noise immunity.

The HFBR-1505AZ and HFBR-2505AZ products comply

with SERCOS specifications for optical characteristics and

connector style, and have guaranteed performance up

to 10 MBd. (Typically the 16 MBd required by SERCOS

is possible as well but please contact Avago regarding

the plan for the 16 MBd device.)

PROFIBUS

PROFIBUS, an acronym of PROcess FIeld BUS, is an open

fieldbus standard defined for data rates ranging from

9.6 kBd to 12 MBd in selectable steps for wire and

optical fiber. PROFIBUS is a German national DIN 19245

standard and a European CENELEC standard EN 50170.

The ST® connector is the recommended optical port of

the PROFIBUS optical fiber version but other connectors

are allowed as well. The HFBR-1515BZ and HFBR-2515BZ

comply fully to the technical guideline using Plastic

Optical Fiber up to 6 MBd, and have a guaranteed

performance at data rates up to 10 MBd. (Typically the

12 MBd is possible as well, but please contact Avago

regarding the plan for the 12 MBd device.)

INTERBUS-S

INTERBUS-S, a special open Sensor/Actuator Bus, is

finding a broad acceptance in the factory automation

industry. The HFBR-1505CZ and HFBR-2505CZ were

specially designed for this application and can be used

with 1 mm POF and 200 μm HCS fiber at the specified

data rates of 500 kBd and 2 MBd. The optical transmis-

sion guideline is a supplement of the German National

DIN E 19258 standard draft. On the European level, prEN

50254 is the draft of the INTERBUS-S fieldbus.

Features

 Meets industrial SERCOS, PROFIBUS, and INTERBUS-S

standard

 SMA and ST® ports

 650 nm wavelength technology

 Specified for use with 1 mm plastic optical fiber and

200 μm hard clad silica

 Auto-insertable and wave solderable

 DC – 10 MBd data rate

 RoHS-compliant

Applications

 Industrial control data links

 Factory automation data links

 Voltage isolation applications

 PLCs

 Motor drives

 Sensor, meter and actuator interfaces

ST® is a registered trademark of AT&T.

HCS® is a registered trademark of OFS Corporation.

Share Link: