OPL530 データシートの表示（PDF） - TT Electronics.
部品番号
コンポーネント説明
メーカー
OPL530 Datasheet PDF : 10 Pages
| |||
OPL530, OPL531, OPL535, OPL536, OPL550,
OPL551, OPL560, OPL561, OPL562, OPL563
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Propagation Delay
OPL530
tpEeT(+)
OPL530-OC,
OPL536-OC
OPL550-OC, OPL551-OC
-
1.0
-
-
1.0
-
-
2.5
5
µs EE = 0 or 1 mW/cm2, RL = 300 Ω to 5 V,
CL = 50 pF
µs EE = 0 or 1 mW/cm2, RL = 300 Ω to 5 V,
CL = 50 pF
µs VCC = 5 V, TA = 25° C,
EE = 0 or 3 mW/cm2, RL = 8 TTL loads, f =
10 kHz, DC = 50%
tpEeT(-)
Propagation Delay
OPL530,
OPL530-OC,
OPL536-OC
-
3.0
-
µs EE= 0 or 1 mW/cm2, RL = 300 Ω to 5V, CL
= 50 pF
OPL550-OC, OPL551-OC
-
2.5
5
µs VCC = 5 V, TA = 25° C, EE = 0 or 3 mW/cm2,
RL = 360 Ω, f = 10 kHz, DC = 50%
Propagation Delay (Low-High/High-Low)
tPLH, TPHL
OPL560, OPL561
-
5
-
µs DC = 50%, RL = 10 TTL Loads
OPL561-OC
-
5
-
µs DC = 50%, RL = 300 Ω
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPL530, OPL530-OC, OPL536, a maximum
of 20 grams force may be applied to leads while at soldering temperatures.
(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC. De-
rate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 series.
(3) Irradiance measurements are made with λi = 935 nm.
(4) This applies to OC versions only. For ICC on pull-up versions, add VCC/10 KΩ.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue C 09/2016 Page 10
Share Link: 