OPL530-OCB データシートの表示（PDF） - TT Electronics.

部品番号

コンポーネント説明

メーカー

OPL530-OCB

Photologic® Sensor

TT Electronics. 

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Features:

 Choice of four output options in low-cost side-looking package

 Choice of two sensitivity options (OPL560/561/562/563)

 High noise immunity

 Direct TTL/LSTTL CMOS interface

 Data rates to 250 kBaud for all except OPL560 series (200 kBaud)

 Low power consumption

RoHS

Description: All components in this series include a photodiode, amplifier, voltage regulator, Schmitt trigger and

NPN output transistor on a single silicon chip. OPL560 chips also include a voltage regulator on the chip. All

devices in the series have a Photologic® chip that is encapsulated in a molded plastic side-looking package with

an integral lens (recessed integral lens for OPL535 and OPL536). This packaging provides enhanced optical

coupling, combined with mechanical protection. The hysteresis characteristics of the Schmitt trigger on each

device offers high immunity to noise on input and VCC.

OPL530, OPL531, OPL535 and OPL536 include a 10 K Ω pull-up resistor (RL) from output to VCC. These

components exhibit very stable performance over supply voltages ranging from 4.5 V to 16 V and a wide range of

irradiance levels. OPL550 and OPL551 devices feature TTL/LSTTL compatible logic level output which can drive

up to 8 TTL loads without additional circuitry and medium-speed data rates to 250 kBaud, with typical rise and fall

times of 25 nanoseconds. OPL560, OPL561, OPL562 and OPL563 devices feature TTL/LSTTL compatible logic

level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.

OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 are mechanically and spectrally

matched to OP140 and OP240 LEDs. OPL535 and OPL536 are mechanically and spectrally matched to OP145

and OP245 series LEDs.

Applications: Non-contact reflective object sensor, Assembly line automation, Machine automation, Machine safety, End of travel

sensor, Door sensor

Base Part Number

Package

Output Type - with Light

OPL530, OPL530-OC

OPL531A, OPL531-OCA

External Lens

Internal 10K - High

Internal 10K - Low

OPL535A, OPL535B

OPL536A, OPL536-OC, OPL536-OCA

Recessed

Lens

Internal 10K - High

Internal 10K - Low

OPL550, OPL550A, OPL550-OC, OPL550-OCA

Totem Pole - High

OPL551A, OPL551-OC, OPL551-OCA

Totem Pole - Low

OPL560, OPL560A, OPL560-OCA

OPL561, OPL561-OC, OPL561-OCA

External Lens

Totem Pole - High

Totem Pole - Low

OPL562, OPL562A, OPL562-OC, OPL562-OCA

Totem Pole - High

OPL563, OPL563-OC, OPL563-OCA

Totem Pole - Low

OC = Open Collector Output

Input Power Range

(mW/cm2) [Min/Max]

-

A

B

0.08/0.40 0.08/0.25 0.20/0.40

0.25/2.4

0.25/2.5

0.25/1.4

N/A

0.25/1.5

0.09/0.55 0.09/0.36 N/A

0.025/0.23 0.025/0.14 N/A

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

© TT electronics plc

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

Issue C 09/2016 Page 1

Share Link: