MAX9450EHJ データシートの表示（PDF） - Microsemi Corporation

部品番号

コンポーネント説明

メーカー

MAX9450EHJ

High-Precision Clock Generators with Integrated VCXO

Microsemi Corporation 

LOCK

IN0+

IN0-

IN1+

IN1-

CMON

INT

SEL0

SEL1

SCL

SDA

AD0

AD1

GND/CS

High-Precision Clock Generators

with Integrated VCXO

Functional Diagram

12kΩ TO 200kΩ

6nF

60nF 10kΩ

CRYSTAL

15MHz TO 160MHz

FUNDAMENTAL MODE

AND AT CUT

RJ

LP2

LP1

LOCK DET

0

1/P

1

PFD/CP

LOOP FILTER

1/M

X1

X2

VCXO

DIV0

1/N0

DIV1

1/N1

MUX

CLK

MONITOR

LUT FOR P

LUT FOR M

LUT FOR N1, N2

CLK0+

CLK0-

CLK1+

CLK1-

OE

I2C PORT

SPI PORT

CONTROL

REGISTERS

MAX9450

MAX9451

MAX9452

MR

VDDA

GNDA

VDD

GND

Detailed Description

The MAX9450/MAX9451/MAX9452 clock generators

provide high-precision clocks for timing in SONET/SDH

systems or Gigabit Ethernet systems. The MAX9450/

MAX9451/MAX9452 can also provide clocks for the

high-speed and high-resolution ADCs and DACs in 3G

base stations. Additionally, the MAX9450/MAX9451/

MAX9452 can be used as a jitter attenuator for generat-

ing high-precision clock signals.

The MAX9450/MAX9451/MAX9452 feature two differen-

tial inputs and two differential clock outputs. The inputs

accept LVPECL, LVDS, and LVCMOS signals. The

input reference clock ranges from 8kHz to 500MHz and

the output clock ranges from 15MHz to 160MHz. The

internal clock monitor observes the condition of the

input reference clocks and provides a hitless switch

when an input failure is detected. The MAX9450/

MAX9451/MAX9452 also provide holdover in case no

input clock is supplied.

Control and Status Registers

The MAX9450/MAX9451/MAX9452 contain eight 8-bit

control registers named CR0 to CR7. The registers are

accessible through the I2C/SPI interface. CR0 is for the

frequency-dividing factor, P. CR1 and CR2 hold the

values of the divider, M. CR3 and CR4 are for dividers

_______________________________________________________________________________________ 7

Share Link: