W78L054A データシートの表示（PDF） - Winbond
部品番号
コンポーネント説明
メーカー
W78L054A Datasheet PDF : 26 Pages
| |||
W78LE54/W78L054A
1. GENERAL DESCRIPTION
The W78L054A is an 8-bit microcontroller which can accommodate a wide supply voltage range with
low power consumption. The instruction set for the W78L054A is fully compatible with the standard
8051. The W78L054A contains an 16K bytes Flash EPROM; a 256 bytes RAM; four 8-bit bi-directional
and bit-addressable I/O ports; an additional 4-bit I/O port P4; three 16-bit timer/counters; a hardware
watchdog timer and a serial port. These peripherals are supported by eight sources two-level interrupt
capability. To facilitate programming and verification, the Flash EPROM inside the W78L054A allows
the program memory to be programmed and read electronically. Once the code is confirmed, the user
can protect the code for security.
The W78L054A microcontroller has two power reduction modes, idle mode and power-down mode,
both of which are software selectable. The idle mode turns off the processor clock but allows for
continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power
consumption. The external clock can be stopped at any time and in any state without affecting the
processor.
2. FEATURES
• Fully static design 8-bit CMOS microcontroller
• Wide supply voltage of 2.4V to 5.5V
• 256 bytes of on-chip scratchpad RAM
• 16 KB electrically erasable/programmable Flash EPROM
• 64 KB program memory address space
• 64 KB data memory address space
• Four 8-bit bi-directional ports
• One extra 4-bit bit-addressable I/O port, additional INT2 / INT3
(available on 44-pin PLCC/QFP package)
• Three 16-bit timer/counters
• One full duplex serial port(UART)
• Watchdog Timer
• Eight sources, two-level interrupt capability
• EMI reduction mode
• Built-in power management
• Code protection mechanism
• Packages:
− Lead Free (RoHS) DIP 40: W78L054A24DL
− Lead Free (RoHS) PLCC 44: W78L054A24PL
− Lead Free (RoHS) PQFP 44: W78L054A24FL
-2-
Share Link: 