AT24C01D-CUM-T(2014) データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

AT24C01D-CUM-T
(Rev.:2014)

I2C-Compatible (2-wire) Serial EEPROM 1-Kbit (128 x 8) or 2-Kbit (256 x 8)

Atmel Corporation 

3.5 Software Reset

After an interruption in protocol, power loss, or system reset, any 2-wire part can be protocol reset by following

these steps:

1. Create a Start condition,

2. Clock nine cycles,

3. Create another Start condition followed by a Stop condition as seen in Figure 3-2.

The device will be ready for the next communication after above steps have been completed.

Figure 3-2. Software Reset

Dummy Clock Cycles

SCL

1

2

3

Start

Condition

SDA

8

9

Start

Condition

Stop

Condition

6

AT24C01D and AT24C02D [DATASHEET]

Atmel-8871B-SEEPROM-AT24C01D-02D-Datasheet_032014

Share Link: