MAX4053ACSE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4053ACSE Datasheet PDF : 19 Pages
| |||
Low-Voltage, CMOS Analog
Multiplexers/Switches
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND
V+ ........................................................................-0.3V to +17V
V-..........................................................................+0.3V to -17V
V+ to V- ................................................................-0.3V to +17V
Voltage into Any Terminal (Note 1) ..........(V- - 2V) to (V+ + 2V)
or 30mA (whichever occurs first)
Continuous Current into Any Terminal..............................±30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle) .................................±100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C)............842mW
Narrow SO (derate 8.70mW/°C above +70°C)..............696mW
QSOP (derate 8.00mW/°C above +70°C) .....................640mW
CERDIP (derate 10.00mW/°C above +70°C) ................800mW
Operating Temperature Ranges
MAX405_C_ E/MAX405_AC_E .............................0°C to +70°C
MAX405_E_ E/MAX405_AE_E...........................-40°C to +85°C
MAX405_MJE/MAX405_AMJE ........................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
ANALOG SWITCH
Analog Signal Range
VCOM, VNO
COM–NO On-Resistance
RON
COM–NO On-Resistance
Match Between Channels
(Note 3)
∆RON
CONDITIONS
MIN TYP MAX
(Note 2)
V+ = 5V, V- = -5V, INO = 1mA,
VCOM = ±3V
C, E, M
V-
V+
TA = +25°C
60 100
C, E, M
125
MAX4051A, TA = +25°C
6
MAX4052A,
V+ = 5V, V- = -5V,
MAX4053A C, E, M
12
INO = 1mA,
VCOM = ±3V
MAX4051, TA = +25°C
12
MAX4052,
MAX4053 C, E, M
18
UNITS
V
Ω
Ω
COM–NO On-Resistance
Flatness (Note 4)
RFLAT(ON)
V+ = 5V, V- = -5V,
INO = 1mA,
VCOM = -3V, 0V, 3V
MAX4051A, TA = +25°C
MAX4052A,
MAX4053A C, E, M
10
Ω
15
V+ = 5.5V, V- = -5.5V,
MAX4051, TA = +25°C -1 0.002 1
VNO = 4.5V,
MAX4052, C, E
-10
10
NO Off-Leakage Current
(Note 5)
INO(OFF)
VCOM = -4.5V
V+ = 5.5V, V- = -5.5V,
MAX4053 M
-100
100
MAX4051A, TA = +25°C -0.1 0.002 0.1
nA
VNO = -4.5V,
MAX4052A, C, E
-5
5
VCOM = 4.5V
MAX4053A M
-100
100
2 _______________________________________________________________________________________
Share Link: 