MAX4610EGE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4610EGE Datasheet PDF : 11 Pages
| |||
Low-Voltage, Quad, SPST
CMOS Analog Switches
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND.)
V+ ...........................................................................-0.3V to +13V
IN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V+ + 0.3V)
Continuous Current (any terminal)
(pulsed at 1ms, 10% duty cycle) .....................................20mA
Peak Current (any terminal)
(pulsed at 1ms, 10% duty cycle) .....................................40mA
ESD per Method 3015.7......................................................> 2kV
Continuous Power Dissipation (TA = +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C) ..........500mW
14-Pin Narrow SO (derate 8.00mW/°C above +70°C) ..640mW
14-Pin Plastic DIP (derate 10.00mW/°C above +70°C) ..800mW
16-Pin QFN (derate 18.5mW/°C above +70°C) ..........1481mW
Operating Temperature Ranges
MAX461_C_ _ ......................................................0°C to +70°C
MAX461_E_ _....................................................-40°C to +85°C
MAX461_A_ _ .................................................-40°C to +125°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, VIN_H = 2.4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
ANALOG SWITCH
Analog Signal Range
(Note 3)
On-Resistance
VCOM_,
VNO_,
VNC_
RON
V+ = 4.5V,
ICOM_ = 1mA,
VNO_ = VNC_ = 3V
TA = +25°C
TA = TMIN to TMAX
On-Resistance Match
Between Channels (Note 4)
On-Resistance Flatness
(Note 5)
NO_ or NC_ Off-Leakage
Current (Note 6)
COM_ Off-Leakage Current
(Note 6)
COM_ On-Leakage Current
(Note 6)
ΔRON
V+ = 4.5V,
ICOM_ = 1mA,
VNO_ = VNC_ = 3V
TA = +25°C
TA = TMIN to TMAX
RFLAT(ON)
V+ = 4.5V;
ICOM_ = 1mA;
VNO_ = VNC_ = 3V,
2V, 1V
TA = +25°C
TA = TMIN to TMAX
INO(OFF)
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = 4.5V, 1V
TA = +25°C
TA = -40°C to +85°C
TA = -40°C to +125°C
ICOM(OFF)
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = VNC_ = 4.5V, 1V
TA = +25°C
TA = -40°C to +85°C
TA = -40°C to +125°C
ICOM(ON)
V+ = 5.5V;
VCOM_ = 1V, 4.5V;
VNO_ = VNC_ = 1V, 4.5V,
or floating
TA = +25°C
TA = -40°C to +85°C
TA = -40°C to +125°C
MIN
TYP
(Note 2)
MAX UNITS
0
V+
V
70
1.0
12
-0.1
-2
-30
-0.1
-2
-30
-0.2
-4
-30
100
Ω
150
5
Ω
8
22
Ω
28
+0.1
+2
nA
+30
+0.1
+2
nA
+30
+0.2
+4
nA
+30
2 _______________________________________________________________________________________
Share Link: 