MAX4541 データシートの表示（PDF） - Maxim Integrated

部品番号

コンポーネント説明

メーカー

MAX4541

Low-voltage, single-supply single SPDT analog switch.

Maxim Integrated 

Low-Voltage, Single-Supply

Dual SPST/SPDT Analog Switches

ABSOLUTE MAXIMUM RATINGS

Voltage Referenced to GND

V+ .........................................................................-0.3V to +13V

IN_, COM_, NC_, NO_ (Note 1)..................-0.3V to (V+ + 0.3V)

Continuous Current (any terminal)....................................±10mA

Peak Current, COM_, NO_, NC_

(pulsed at 1ms, 10% duty cycle max) ............................±20mA

ESD per Method 3015.7 .................................................> 2000V

Continuous Power Dissipation

SOT23-6 (derate 7.1mW/°C above +70°C)....................571mW

SOT23-8 (derate 5.3mW/°C above +70°C)....................421mW

TDFN (derate 24.4mW/°C above +70°C).....................1951mW

µMAX (derate 4.10mW/°C above +70°C) ......................330mW

Narrow SO (derate 5.88mW/°C above +70°C) ..............471mW

Plastic DIP (derate 9.09mW/°C above +70°C) ..............727mW

Operating Temperature Ranges

MAX454_C_ _ .......................................................0°C to +70°C

MAX454_E_ _.....................................................-40°C to +85°C

Storage Temperature Range .............................-65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum

current rating.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS—Single +5V Supply

(V+ = +5V ±10%, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.) (Notes 2, 3)

PARAMETER

SYMBOL

CONDITIONS

MIN TYP

ANALOG SWITCH

Analog Signal Range

On-Resistance

On-Resistance Match

Between Channels (Note 5)

On-Resistance Flatness

(Note 6)

NO_ or NC_ Off-Leakage

Current (Note 7)

COM_ Off-Leakage Current

(Note 7)

COM_ On-Leakage Current

(Note 7)

VCOM_,

VNO_,

VNC_

RON

ΔRON

RFLAT(ON)

INO(OFF)

or

INC(OFF)

ICOM(OFF)

ICOM(ON)

(Note 4)

V+ = 4.5V,

ICOM_ = 1.0mA,

VNO_ or VNC_ = 3.5V

V+ = 5V,

ICOM_ = 1.0mA,

VNO_ or VNC_ = 3.5V

V+ = 5V;

ICOM_ = 1.0mA; VNO_ or

VNC_ = 1V, 2V, 3V

V+ = 5.5V;

VCOM_ = 1V, 4.5V;

VNO_ or VNC_ = 4.5V, 1V

V+ = 5.5V;

VCOM_ = 4.5V, 1V;

VNO_ or VNC_ = 1V, 4.5V

V+ = 5.5V;

VCOM_ = 1V, 4.5V or

VNO_ or VNC_ = 1V,

4.5V, or floating

TA = +25°C

TA = TMIN to TMAX

TA = +25°C

TA = TMIN to TMAX

TA = +25°C

TA = TMIN to TMAX

TA = +25°C

TA = TMIN

to TMAX

C, E

TA = +25°C

TA = TMIN

to TMAX

C, E

TA = +25°C

TA = TMIN

to TMAX

C, E

0

30

0.8

2

-0.1 ±0.01

-5

-0.1

-5

-0.2

-10

MAX UNITS

V+

V

60

Ω

75

2

Ω

4

6

Ω

8

+0.1

nA

+5

+0.1

nA

+5

+0.2

nA

+10

2 _______________________________________________________________________________________

Share Link: