MAX4619CSE データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
メーカー
MAX4619CSE Datasheet PDF : 16 Pages
| |||
MAX4617/MAX4618/MAX4619
High-Speed, Low-Voltage, CMOS Analog
Multiplexers/Switches
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND
VCC, A, B, C, or Enable...........................................-0.3V to +6V
Voltage into Any Analog Terminal
(Note 1) .........................................................-0.3V to (VCC + 0.3V)
Continuous Current into Any Terminal..............................±75mA
Peak Current, X_, Y_, Z_
(pulsed at 1ms, 10% duty cycle) .................................±200mA
Continuous Power Dissipation (TA = +70°C)
TSSOP (derate 9.4mW/°C above +70°C)......................755mW
Narrow SO (derate 8.70mW/°C above +70°C)..............696mW
Plastic DIP (derate 10.53mW/°C above +70°C) ..............842mW
Operating Temperature Ranges
MAX461_C_ _ ......................................................0°C to +70°C
MAX461_E_ _ ....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Soldering Temperature (reflow) .......................................+260°C
Note 1: Voltages exceeding VCC or GND on any analog signal terminal are clamped by internal diodes. Limit forward-diode current
to maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(VCC = +4.5V to +5.5V, V_H = 2.4V, V_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 2)
PARAMETER
ANALOG SWITCH
Analog-Signal Range
Switch On-Resistance
Switch On-Resistance
Match Between
Channels (Note 3)
Switch On-Resistance
Flatness (Note 4)
SYMBOL
VX, VY, VZ
RON
ΔRON
RFLAT(ON)
CONDITIONS
VCC = 4.5V; IX, IY, IZ = 10mA;
VX, VY, VZ = 3V
VCC = 5V; IX, IY, IZ = 10mA;
VX, VY, VZ = 3V
VCC = 5V; IX, IY, IZ = 10mA;
VX, VY, VZ = 1V, 2V, 3V
MIN TYP MAX UNITS
C, E
0
TA = +25°C
C, E
TA = +25°C
C, E
C, E
VCC V
8
10
Ω
13
0.2
1
Ω
1.2
1
Ω
X_, Y_, Z_
Off-Leakage Current
(Note 5)
IX_(OFF),
IY_(OFF),
IZ_(OFF)
VCC = 5.5V; VX_, VY_, VZ_ = 4.5V, 1V;
VX, VY, VZ = 1V, 4.5V
TA = +25°C -1 0.002 1
nA
C, E
-10
10
X, Y, Z Off-Leakage
Current (Note 5)
IX(OFF),
IY(OFF),
IZ(OFF)
VCC = 5.5V; VEE = -5.5V;
VX_, VY_, VZ_ = 4.5V, 1V;
VX, VY, VZ = 1V, 4.5V
TA = +25°C -1 0.002 1
nA
C, E
-10
10
X, Y, Z On-Leakage
Current (Note 5)
DIGITAL I/O
Input Voltage High
Input Voltage Low
IX(ON),
IY(ON),
IZ(ON)
VCC = 5.5V; VX, VY, VZ = 1V, 4.5V;
VX_, VY_, VZ_ = 1V, 4.5V or unconnected
VAH, VBH,
VCH,
VENABLEH
VAL, VBL,
VCL,
VENABLEL
TA = +25°C -1 0.002 1
nA
C, E
-10
10
C, E
2.4
C, E
V
0.8 V
2
Maxim Integrated
Share Link: 