DK86064-1 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

DK86064-1

Dual 14-bit 1GSa/s DAC Development Kit

Fujitsu 

February 2004 Version 1.0

FME/MS/DAC80/FL_2/5084

DK86064-1 Dual 14-bit 1GSa/s DAC Development Kit

connector, thereby removing the Motherboard.

Having done this, it is still possible to continue

using the PC USB interface lead and software if

this functionality is not incorporated in the FPGA.

Ordering Information

Part

Order Reference

Clock Inputs & Analog Outputs

The DAC module is designed to accommodate

up to six SMA connectors. Two are used for the

differential clock in and four for the two

differential analog outputs. Modules are supplied

with transformers on-board to perform single

ended-to-differential and differential-to-single

ended conversions. As such, only 3 SMAs are

required. This facilitates easier connection to

standard test equipment during evaluation.

PC Control Software

To simplify control & configuration of the

MB86064 during evaluation the development kit

includes a PC USB interface lead and a software

utility. The USB interface lead interfaces

between a host PC’s USB port and the 4-wire

serial interface implemented on the device.

Software is supplied on CD.

DK86064-1 Development Kit DK86064-1

(includes General Purpose

Motherboard, DAC module,

PC USB Interface Lead &

Control Software and User

Manual)

Additional DAC Module

DK86064-1-DAC

SMA Adaptors (optional) DK86064-1-SMA

PC USB Interface Lead & DKUSB-1

Control Software

MB86064 Device

MB86064PB-G

DK86064-1 User Manual Contact Fujitsu

MB86064 Datasheet

Contact Fujitsu

Copyright © 2004 Fujitsu Microelectronics Europe GmbH

Production

Page 3 of 4

Disclaimer: The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before

ordering.The information and circuit diagrams in this document are presented “as is”, no license is granted by implication or otherwise.

Share Link: