ACPL-M49T-560E データシートの表示（PDF） - Broadcom Corporation

部品番号

コンポーネント説明

メーカー

ACPL-M49T-560E

Wide Operating Temperature Automotive R2Coupler™ 20-kBd Digital Optocoupler Configurable as Low Power, Low Leakage Phototransistor

Broadcom Corporation 

ACPL-M49T

Data Sheet

Recommended Pb-Free IR Profile

Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision).

NOTE Non-halide flux should be used.

Regulatory Information

The ACPL-M49T is approved by the following safety regulatory organizations.

UL

Approved under UL 1577, component recognition program up to VISO = 4000 VRMS

CSA

Approved under CSA Component Acceptance Notice #5.

IEC/EN/DIN EN 60747-5-5  EC 60747-5-5

 EN 60747-5-5

 DIN EN 60747-5-5

IEC/EN/DIN EN 60747-5-5 Insulation Characteristicsa

Description

Symbol

Characteristic

Units

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

Climatic Classification

Pollution Degree (DIN VDE 0110/1.89)

Maximum Working Insulation Voltage

Input to Output Test Voltage, Method ba

VIORM × 1.875 = VPR, 100% Production Test with tm = 1s, Partial discharge < 5 pC

Input to Output Test Voltage, Method aa

VIORM × 1.6 = VPR, Type and Sample Test, tm = 10s, Partial discharge < 5 pC

Highest Allowable Overvoltage (Transient Overvoltage tini = 60s)

Safety-limiting values – maximum values allowed in the event of a failure.

Case Temperature

Input Current

Output Power

Insulation Resistance at TS, VIO = 500V

VIORM

VPR

VPR

VIOTM

TS

IS, INPUT

PS, OUTPUT

RS

I – IV

I – III

I – II

40/125/21

2

567

1063

907

6000

175

230

600

>109

Vpeak

Vpeak

Vpeak

Vpeak

°C

mA

mW



a. Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/DIN EN

60747-5-5) for a detailed description of Method a and Method b partial discharge test profi les.

Broadcom

-4-

Share Link: