HV5812P-G(2011) データシートの表示（PDF） - Supertex Inc
部品番号
コンポーネント説明
メーカー
HV5812P-G
(Rev.:2011)
(Rev.:2011)
Supertex Inc
HV5812P-G Datasheet PDF : 8 Pages
| |||
Ordering Information
Device
28-Lead PDIP (.600in row spacing)
1.565x.580in body
.250in height (max)
.100in pitch
HV5812
HV5812P-G
-G indicates package is RoHS compliant (‘Green’)
HV5812
28-Lead PLCC
..453x.453in body
.180in height (max)
.050in pitch
HV5812PJ-G
28-Lead SOW
.17.90x7.50mm body
2.65mm height (max)
1.27mm pitch
HV5812WG-G
Pin Configurations
1
28
1
28
Absolute Maximum Ratings
Parameter
Value
Supply voltage, VDD
Supply voltage, VPP
Logic input levels
Maximum junction temperature
-0.5V to +7.5V
-0.5V to +90V
-0.3V to VDD +0.3V
125°C
Storage temperature range
-55°C to +150°C
Power dissipation:
28-Lead PDIP (P)
28-Lead PLCC (PJ)
28-Lead SOW (WG)
2000mW
1900mW
1700mW
Absolute Maximum Ratings are those values beyond which damage to the
device may occur. Functional operation under these conditions is not implied.
Continuous operation of the device at the absolute rating level may affect
device reliability. All voltages are referenced to GND.
Recommended Operating Conditions
Sym Parameter
Min Max Units
VDD Supply voltage
VPP Supply voltage
4.5 5.5
V
20 80
V
Tj Operating junction temperature -40 +125 °C
Power-up sequence should be the following:
1. Connect ground.
2. Apply VDD.
3. Set all inputs (Data, CLK, etc.) to a known state.
4. Apply VPP.
The VPP should not drop below VDD during operation.
Power-down sequence should be the reverse of the above.
28-Lead PDIP (P)
4
28-Lead SOW (WG)
1 28 26
28-Lead PLCC (PJ)
Product Marking
Top Marking
YYWW
HV5812P
LLLLLLLLLL
Bottom Marking
CCCCCCCCCCC
AAA
YY = Year Sealed
WW = Week Sealed
L = Lot Number
C = Country of Origin*
A = Assembler ID*
= “Green” Packaging
*May be part of top marking
Package may or may not include the following marks: Si or
28-Lead PDIP (P)
Top Marking
YY = Year Sealed
YYWW AAA
HV5812PJ
WW = Week Sealed
LLLLLLLLLL L = Lot Number
Bottom
Marking
A
C
=
=
Assembler
Country of
ID
Origin*
= “Green” Packaging
CCCCCCCCCCC *May be part of top marking
Package may or may not include the following marks: Si or
28-Lead PLCC (PJ)
Top Marking
YYWW AAA
HV5812WG
LLLLLLLLLL
Bottom Marking
CCCCCCCCCCC
YY = Year Sealed
WW = Week Sealed
A = Assembler ID
L = Lot Number
C = Country of Origin*
= “Green” Packaging
*May be part of top marking
Package may or may not include the following marks: Si or
28-Lead SOW (WG)
Supertex inc. ● 1235 Bordeaux Drive, Sunnyvale, CA 94089 ● Tel: 408-222-8888 ● www.supertex.com
2
Share Link: