12032IVZ データシートの表示（PDF） - Renesas Electronics

部品番号

コンポーネント説明

メーカー

12032IVZ

Low Power RTC with Battery Backed SRAM and 50/60 Cycle AC Input and Crystal Back-up

Renesas Electronics 

NOT RECOMMENDED FOR NEW DESIGNS

NO RECOMMENDED REPLACEMENT

contact our Technical Support Center at

1-888-INTERSIL or www.intersil.com/tsc

DATASHEET

ISL12032 Real Time Clock with 50/60 Hz clock and Crystal Backup

Low Power RTC with Battery Backed SRAM and 50/60 Cycle AC Input and Crystal Back-up

FN6618

Rev 3.00

May 5, 2011

The ISL12032 device is a low power real time clock with

50/60 AC input for timing synchronization. It also has an

oscillator utilizing an external crystal for timing back-up,

clock/calendar registers, intelligent battery back-up

switching, battery voltage monitor, brownout indicator,

integrated trickle charger for super capacitor, single periodic

or polled alarms, POR supervisory function, and up to 4

Event Detect with time stamp. There are 128 bytes of

battery-backed user SRAM.

The oscillator uses a 50/60 cycle sine wave input, backed by

an external, low-cost, 32.768kHz crystal. The real time clock

tracks time with separate registers for hours, minutes, and

seconds. The calendar registers contain the date, month,

year, and day of the week. The calendar is accurate through

year 2100, with automatic leap year correction and auto

daylight savings correction.

Pinout

X1

X2

VBAT

GND

AC

LV

EVIN

ISL12032

(14 LD TSSOP)

TOP VIEW

1

14

VDD

2

13

IRQ

3

12

SCL

4

11

SDA

5

10

ACRDY

6

9

FOUT

7

8

EVDET

Features

• 50/60 Cycle AC as a Primary Clock Input for RTC Timing

• Redundant Crystal Clock Input Selectable by User

- Dynamically Switch from AC Clock Input to Crystal in

Case of Power Failure

• Real Time Clock/Calendar

- Tracks Time in Hours, Minutes, Seconds and Tenths of

a Second

- Day of the Week, Day, Month, and Year

• Auto Daylight Saving Time Correction

- Programmable Forward and Backward Dates

• Security and Event Functions

- Event Detection with Time Stamp

- Stores First and Last Three Event Time Stamps

• Separate FOUT Pin

- 7 Selectable Frequency Outputs

• Dual Alarms with Hardware and Register Indicators

- Hardware Single Event or Pulse Interrupt Mode

• Automatic Backup to Battery or Super Capacitor

- VBAT Operation Down to 1.8V

- 1.0µA Battery Supply Current

• Two Battery Status Monitors with Selectable Levels

- Seven Selectable Voltages for Each Level

- 1st Level, Trip Points from 4.675V to 2.125V

- 2nd Level, Trip Points from 4.125V to 1.875V

• VDD Power Brownout Monitor

- Six Selectable Trip Levels, from 4.675V to 2.295V

• Time Stamp during Power-to-Battery and

Battery-to-Power Switchover

• Integrated Trickle Charger

- Four Selectable Charging Rates

• 128 Bytes Battery-Backed User SRAM

• I2C Interface

- 400kHz Data Transfer Rate

• Pb-free (RoHS compliant)

Applications

• Utility Meters

• Control Applications

• Security Related Applications

• Vending Machines

• White Goods

• Consumer Electronics

FN6618 Rev 3.00

May 5, 2011

Page 1 of 26

Share Link: