ISL9012 データシートの表示（PDF） - Renesas Electronics

部品番号

コンポーネント説明

メーカー

ISL9012

Dual LDO with Low Noise, Low IQ, and High PSRR

Renesas Electronics 

DATASHEET

ISL9012

Dual LDO with Low Noise, Low IQ, and High PSRR

ISL9012 is a high performance dual LDO capable of

sourcing 150mA current from Channel 1, and 300mA from

Channel 2. The device has a low standby current and

high-PSRR and is stable with output capacitance of 1µF to

10µF with ESR of up to 200m.

The device integrates a Power-On-Reset (POR) function for

the VO2 output. The POR delay for VO2 can be externally

programmed by connecting a timing capacitor to the CPOR

pin. A reference bypass pin is also provided for connecting a

noise-filtering capacitor for low noise and high PSRR

applications.

The quiescent current is typically only 45µA with both LDO’s

enabled and active. Separate enable pins control each

individual LDO output. When both enable pins are low, the

device is in shutdown, typically drawing less than 0.1µA.

Several combinations of voltage outputs are standard.

Output voltage options for each LDO range from 1.5V to

3.3V. Other output voltage options are available on request.

Pinout

ISL9012

(10 LD 3X3 DFN)

TOP VIEW

VIN 1

EN1 2

EN2 3

CBYP 4

CPOR 5

10 VO1

9 VO2

8 POR

7 NC

6 GND

FN9220

Rev 4.00

December 10, 2015

Features

• Integrates two high performance LDOs

- VO1 - 150mA output

- VO2 - 300mA output

• Excellent transient response to large current steps

• Excellent load regulation:

1% voltage change across full range of load current

• High PSRR: 70dB @ 1kHz

• Wide input voltage capability: 2.3V to 6.5V

• Extremely low quiescent current: 45µA (both LDOs on)

• Low dropout voltage: typically 120mV @ 150mA

• Low output noise: typically 30µVRMS @ 100µA (1.5V)

• Stable with 1 to10µF ceramic capacitors

• Separate enable pins for each LDO

• POR output, with adjustable delay time indicates when the

VO2 output is good

• Soft-start to limit input current surge during enable

• Current limit and overheat protection

• ±1.8% accuracy over all operating conditions

• Tiny 10 Ld 3x3mm DFN package

• -40°C to +85°C operating temperature range

• Pin compatible with Micrel MIC2212

• Pb-free (RoHS compliant)

Applications

• PDAs, Cell Phones and Smart Phones

• Portable Instruments, MP3 Players

• Handheld Devices including Medical Handhelds

FN9220 Rev 4.00

December 10, 2015

Page 1 of 12

Share Link: