1N6006 データシートの表示（PDF） - Digitron Semiconductors
部品番号
コンポーネント説明
メーカー
1N6006 Datasheet PDF : 2 Pages
| |||
DIGITRON SEMICONDUCTORS
1N5985-1N6031
500mW ZENER DIODES
Note 1: Zener impedance is derived from the 1KHz AC voltage which results when an AC current having an rms value equal to 10% of DC zener current (IZT or IZK) is superimposed
on IZT or IZK.
Note 2: Voltage measurements to be performed 20 seconds after application of the DC test current.
Note 3: The maximum zener current IZM is for the nominal voltages. The following formula can be used to determine the worse case current for any tolerance device:
IZM = P/VZM; where VZM is the high end of the voltage tolerance specified and P is the rated power of the device.
MECHANICAL CHARACTERISTICS
Case:
Hermetically sealed glass DO-35
Polarity: Cathode band
Marking: Body Painted, alpha-numeric
Dimensions
Inches
Min
Max
BD
-
0.080
BL
-
0.175
LD
0.018
0.022
LL
1.000
-
Millimeters
Min
Max
-
2.030
-
4.440
0.457
0.559
25.400
-
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
sales@digitroncorp.com
www.digitroncorp.com
Rev. 20120906
Share Link: 