STK7562J_ データシートの表示（PDF） - SANYO -> Panasonic

部品番号

コンポーネント説明

メーカー

STK7562J_

Chopper Type Parallel 2-Output Voltage Regulators

SANYO -> Panasonic 

Ordering number:ENN1773

Thick Film Hybrid IC

STK7560 Series

Chopper Type Parallel 2-Output

Voltage Regulators

Applications

• Voltage regulator for printers, electronic typewriters, XY

plotters.

• Voltage regulator for MSX personal computers, floppy

disk drive, computer terminals, portable VTRs.

Features

• ICs having 2 outputs for microcomputer power supply

(5V) and motor drive power supply (12, 15, 24, 36V) and

being capable of delivering 2 regulated outputs from 1

rectifier.

• Good efficiency due to chopper type and no beat trouble

due to fixed oscillation type oscillator common to 2 out-

puts.

• Independent overcurrent protectors for 2 outputs (Fold-

back characteristics).

• Output 2 (drive power supply) can be turned ON/OFF by

external signal. Two outputs can be also turned ON/OFF

simultaneously by an external circuit connected (Refer

to Sample Application Circuit).

• High-precision setting of output voltage, elminating the

need to use a variable resistor for adjustment.

• Input/output Gnd lines are united into one, facilatating

combination with other nagative power supply.

• A negative voltage regulator (–5V, –12V, etc.) can be con-

nected externally (Refer to Sample Application Circuit).

• Output voltage/output current are provided in series.

Package Dimensions

unit:mm

4049

[STK7560 Series]

64.0

55.6

3.6

1

(6.28)

2.54

17×2.54=43.18

18

0.5

unit:mm

4050

[STK7560 Series]

64.0

55.6

3.6

1

(6.21)

18

2.54

0.5

17×2.54=43.18

unit:mm

4051A

[STK7560 Series]

78.0

70.0

8.5

0.4

2.9

SANYO : SIP18

8.5

0.4

2.9

SANYO : SIP18

9.0

3.6

(13.41)

1

18

2.54

0.5

17×2.54=43.18

0.4

2.9

SANYO : SIP18

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

N0199TH (KT)/D077AT, TS No.1773–1/13

Share Link: