16494A-005 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

16494A-005

Precision Source/Measure Unit

Unspecified 

05 | Keysight | B2900A Series Precision Source/Measure Unit – Data Sheet

Wide Voltage and Current Coverage for Testing a Variety of Devices

Test up to 210 V and 3 A (DC) or 10.5 A (pulsed)

with a single instrument

The B2900A SMUs can source and measure voltages of ±210 V and

currents of ±3 A (DC) or ±10.5 A (pulsed). This versatility allows

you to standardize on a single SMU model and minimize support

costs. These capabilities are present on both single and dual

channel versions, since on the 2-channel versions both channels

can be operated completely independently.

Integrated sweep and arbitrary waveform

measurement functionality

The Keysight B2900A Series has capabilities that allow it to

perform more than just simple DC and pulsed measurements. The

B2900A SMUs have a built-in sweep capability that supports all

of the standard sweep parameters such as linear and logarithmic

modes, single and double sweep functions and constant and

pulsed sweep operation. The B2900A GUI fully supports the

sweep measurement function, thereby allowing sweep measure-

ments to be made and displayed quickly from the instrument

front panel. Of course, the user can also make the same sweep

measurements just as efficiently on the B2900A SMUs under

remote control using SCPI commands. This integrated sweep

measurement capability improves efficiency and reduces

measurement setup time.

In addition to its resident sweep functionality, the Keysight

B2900A Series also supports arbitrary waveform generation

(AWG) and list sweep capabilities. The AWG and list sweep

functions allow you to create waveforms with up to 2500 steps

for maximum flexibility, and enable you to specify a waveform of

arbitrary shape using familiar spreadsheet compatible data-entry

formats. The AWG and list sweep features are especially useful

when characterizing devices where the response varies greatly

depending upon the applied voltage or current, since they give

you the flexibility to “zoom in” on areas of interest.

200 μs

Built-in functions provide flexible

waveform generation capabilities

You can create current pulses of up to 10.5 amps, which helps to

minimize device self-heating effects.

210 V

Load: open

0.5 ms

You can ramp up to a voltage of 200 V in 0.5 millisecond, which is

useful for evaluating high-power components.

Constant DC

Pulse

Linear sweep

Pulsed

linear sweep

Logarithmic

sweep

Custom wave forms (list sweep)

Share Link: