3535 データシートの表示（PDF） - ASM GmbH

部品番号

コンポーネント説明

メーカー

3535

LCR HiTESTER

ASM GmbH 

1

Detachable Head Amp

Detach the Head Amp Unit from the 3535 and

extend its reach to the measurement object

using a dedicated cable so as to minimize the

effect of measurement leads.

3535 MAIN UNIT

9678 CONNECTION CABLE

Broad Frequency Measurement Range

The measurement frequency is set with four-digit resolution

from 100 kHz to 120 MHz.

6-millisecond Minimum Measurement Time

Four sampling rates can be selected: FAST, NORMAL, SLOW

and SLOW2. The minimum measurement time of about 6

ms (displaying |Z|) provides rapid sampling for optimum

production line efficiency.

(The measurement frequency range depends on the measured

parameter type).

14 Parameter Types

The following parameters can be measured, and selected

parameters can be captured using a PC. |Z|, |Y|, θ, Rp, Rs

(ESR), G, X, B, Lp, Ls, Cp, Cs, D (tanδ) and Q.

Adjust for Conditions While Measuring

Measurement frequency, signal level and other conditions can

be changed while monitoring measurement values, showing the

effects of trial measurements and test condition settings.

Store Measurement Data

Up to 200 measurement values can be stored in the main unit.

Saved values can be transferred to a computer or printed all at

once.

Zoom Display

Up to four parameters can be displayed enlarged, for easy

observation of the measurement values on production lines and

in other situations where the display has to be monitored from

a distance.

Printer Output

With the optional 9442 PRINTER, measurement values,

comparator results and screen data can be printed.

HEAD AMP UNIT

BIN (Classification) Measurement

Using up to ten classifications of two measurements, measurement

values can be easily classified by rank.

Continuous Measurements

Store up to 30 sets of measurement conditions. Of multiple

conditions stored in memory, up to five measurements can

be made sequentially per condition saved on the screen.

With the comparator function, the results of a sequence of

measurements can be logically ANDed and output from a

single instrument.

Load Compensation Function

A standard component can be measured to obtain a compensation

amount to be applied to subsequent measurement values.

This function is useful for matching measurement values

between different instruments.

For Changing Production Lines

Utilize the ability to store up to 30 sets of measurement conditions,

including comparator values, to provide rapid response to frequent

component changes on flexible production lines.

Simultaneously Measure up to 4 Parameters

Any four of fourteen parameter types can be selected for

simultaneous measurement and display.

Correlation Compensation Function

The constants a and b can be set in the following compensation

function expression:

Compensation value = a × measurement value + b

Share Link: