OPI127-032 データシートの表示（PDF） - TT Electronics.

部品番号

コンポーネント説明

メーカー

OPI127-032

Photologic® Optically Coupled Isolator

TT Electronics. 

Sensing and Control

Photologic® Optically

Coupled Isolator

OPI127-032

OOPIP1I2172‐703-2In‐vInevrteerdteTdoTtoetmemPoPloeleOOuutptpuutt

Absolute Maximum Ra ngs (TA = 25o C unless otherwise noted)

Storage Temperature

Opera ng Temperature

Supply Voltage, VCC (not to exceed 3 seconds)

Input‐to‐Output Isola on Voltage(1)(2)

Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(3)

Input Diode

Forward DC Current

Reverse DC Voltage

Power Dissipa on(4)

Output Photosensor

Output Photologic® Power Dissipa on(5)

Dura on of Output Short to VCC or Ground

Voltage at Output Lead

‐55° C to +100° C

‐55° C to +100° C

+10 V

± 15 kVDC

260° C

25 mA

2V

200 mW

120 mW

1.00 second

35 V

Notes:

(1) Measured with input and output leads shorted.

(2) UL recogni on is for 3500 Vrms at 60Hz.

(3) RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering.

(4) Derate linearly 1.33 mW/° C above 25° C.

(5) Derate linearly 3.40 mW/° C above 90° C.

General Note

TT Electronics reserves the right to make changes in product specifica on

without no ce or liability. All informa on is subject to TT Electronics’ own data

and is considered accurate at me of going to print.

© TT electronics plc

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www. electronics.com

Issue E.1 06/2016 Page 2

Share Link: