STEVAL-PCC010V1 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

STEVAL-PCC010V1

ST802RT1A Ethernet PHY demonstration board with STM32F107 controller add-on board

STMicroelectronics 

STEVAL-PCC010V1

ST802RT1A Ethernet PHY demonstration board with

STM32F107 controller add-on board

Data brief

Features

■ ST802RT1A Ethernet PHY demonstration

board:

– ST802RT1A fast Ethernet physical layer

) transceiver

t(s – On-board 3.3 V LDO regulator

c – On-board 25 MHz crystal

u – 2 jumpers for boot-strap configuration (MII

d address, auto-negotiation, loopback, power

ro down, MII/RMII configuration)

P – Several GND test points and jumpers for

te power consumption measurement

le – Connectors: 20-pin full pitch header

o connector for debug purposes (compatible

s with the STM32F107 controller board); 40-

b pin connector compatible with Spirent

O Communications SmartBits 200/2000

- (SMB-200/ SMB-2000) analysis system

t(s) – RJ45 connector with embedded

transformer

uc – RoHS compliant

d ■ STM32F107 controller add-on board:

ro – STM32F107 connectivity line Cortex™-M3

P based microcontroller with embedded

te Ethernet MAC

le – On-board 3.3 V LDO regulator

o – On-board 25 MHz crystal

bs– Reset button, power LED, general-purpose

O button and two LEDs

STEVAL-PCC010V1

Description

The STEVAL-PCC010V1 demonstration kit

consists of two boards: the ST802RT1A Ethernet

PHY demonstration board and the STM32F107

controller add-on board.

The ST802RT1A demonstration board is

designed as an evaluation platform for the

ST802RT1A device. It allows the user to easily

select the PHY boot options to evaluate the power

consumption of the chip, and to attach the device

to professional test equipment.

The STM32F107 controller board can extend the

ST802RT1A demonstration board with the

– Connectors: 20-pin full-pitch header

STM32F107 microcontroller and its embedded

connector for debug purposes, compatible

MAC.

with ST802RT1A demonstration board; 20-

pin JTAG connector

The system allows immediate evaluation of an

Internet appliance based on the embedded

– Additional general-purpose 20-pin full pitch microcontroller and Ethernet PHY.

header connector; USB device connector

(+5 V power supply)

– RoHS compliant

By default, the controller board is pre-Flashed

with a web server application for demonstration

purposes.

March 2010

Doc ID 17201 Rev 1

For further information contact your local STMicroelectronics sales office.

1/9

www.st.com

9

Share Link: