AFCT-5943XXZ データシートの表示（PDF） - Avago Technologies

部品番号

コンポーネント説明

メーカー

AFCT-5943XXZ

Single Mode SFF Transceivers for SONET OC-48/SDH STM-16 Multirate Operation

Avago Technologies 

*4

2 x Ø 2.29 MAX. 2 x Ø 1.4 ±0.1

(0.09)

(0.055 ±0.004)

17.8

(0.700)

7.11

(0.28)

2 x Ø 1.4 ±0.1

(0.055 ±0.004)

13.34

(0.525)

7.59

(0.299)

3

(0.118)

3

(0.118)

6

(0.236)

4 x 1.78

(0.07)

4.57

(0.18)

Figure 7. Recommended Board Layout Hole Pattern

3.56

(0.14)

10.16

(0.4)

*5

4 x Ø 1.4 ±0.1

(0.055 ±0.004)

9.59

(0.378)

2

(0.079)

2 2 x Ø 2.29

(0.079) (0.09)

3.08

(0.121)

10 x Ø 0.81 ±0.1

(0.032 ±0.004)

NOTES:

1. THIS FIGURE DESCRIBES MSA RECOM-

MENDED CIRCUIT BOARD LAYOUT FOR

THE SFF TRANSCEIVER.

2. THE HATCHED AREAS ARE KEEP-OUT

AREAS RESERVED FOR HOUSING

STANDOFFS. NO METAL TRACES OR

GROUND CONNECTION IN KEEP-OUT

AREAS.

3. 2 x 5 TRANSCEIVER MODULE REQUIRES 16

PCB HOLES (10 I/O PINS, 2 SOLDER POSTS

AND 4 OPTIONAL PACKAGE GROUNDING

TABS). PACKAGE GROUNDING TABS

SHOULD BE CONNECTED TO SIGNAL

GROUND.

*4. THE MOUNTING STUDS SHOULD BE

SOLDERED TO CHASSIS GROUND FOR

MECHANICAL INTEGRITY AND TO ENSURE

FOOTPRINT COMPATIBILITY WITH OTHER

SFF TRANSCEIVERS.

*5. HOLES FOR OPTIONAL HOUSING LEADS

MUST BE TIED TO SIGNAL GROUND.

10.16 ±0.1

(0.4 ±0.004)

TOP OF PCB

15.24

(0.6)

B

B

DETAIL A

15.24

(0.6)

1

(0.039)

A

SOLDER POSTS

14.22 ±0.1

(0.56 ±0.004)

15.75 MAX. 15.0 MIN.

(0.62 MAX. 0.59 MIN.)

SECTION B - B

DIMENSIONS IN MILLIMETERS (INCHES)

1. FIGURE DESCRIBES THE RECOMMENDED FRONT PANEL OPENING FOR A LC OR SG SFF TRANSCEIVER.

2. SFF TRANSCEIVER PLACED AT 15.24 mm (0.6) MIN. SPACING.

Figure 8. Recommended Panel Mounting



Share Link: