LTC6362
PIN FUNCTIONS
–IN (Pin 1): Inverting Input of Amplifier. Valid input range
is from V– to V+.
VOCM (Pin 2): Output Common Mode Reference Voltage.
The voltage on this pin sets the output common mode
voltage level. If left floating, an internal resistor divider
develops a default voltage of 2.5V with a 5V supply.
V+ (Pin 3): Positive Power Supply. Operational supply
range is 2.8V to 5.25V when V– = 0V.
+OUT (Pin 4): Positive Output Pin. Output capable of
swinging rail-to-rail.
–OUT (Pin 5): Negative Output Pin. Output capable of
swinging rail-to-rail.
V– (Pin 6/Exposed Pad Pin 9): Negative Power Supply,
Typically 0V. Negative supply can be negative as long as
2.8V ≤ (V+ – V–) ≤ 5.25V still holds.
SHDN (Pin 7): When SHDN is floating or directly tied to
V+ the LTC6362 is in the normal (active) operating mode.
When the SHDN pin is connected to V–, the part is disabled
and draws approximately 70µA of supply current.
+IN (Pin 8): Noninverting Input of Amplifier. Valid input
range is from V– to V+.
BLOCK DIAGRAM
8
7
6
+IN
SHDN
V–
V–
V+ V–
V+
V+
VOCM
340k
340k
V–
V+
+
–
V– V–
V–
V+ V–
V+
–IN
1
VOCM
V+
2
3
5
–OUT
V–
V+
V–
V+
+OUT
4
6362 BD
6362fa
9