GRM219R11E474JA88 データシートの表示（PDF） - Murata Manufacturing

部品番号

コンポーネント説明

メーカー

GRM219R11E474JA88

Chip Monolithic Ceramic Capacitor for General

Murata Manufacturing 

ﾁｯﾌﾟ詰め状態

(単位：mm)

Package

GRM Type

1.3 Tapes for capacitors are wound clockwise shown in Fig.3.

(The sprocket holes are to the right as the tape is pulled toward the user.)

1.4 Part of the leader and part of the vacant section are attached as follows.

Tail vacant Section Chip-mounting Unit Leader vacant Section

(in:mm)

Leader Unit

(Top Tape only)

160 min.

190 min.

210 min.

Direction

of Feed

1.5 Accumulate pitch : 10 of sprocket holes pitch = 20±0.3mm(GRM01/02)

40±0.3mm(GRM03 min.)

1.6 Chip in the tape is enclosed by top tape and bottom tape as shown in Fig.1.

1.7 The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.

1.8 There are no jointing for top tape and bottom tape.

1.9 There are no fuzz in the cavity.

1.10 Break down force of top tape : 5N min.

Break down force of bottom tape : 5N min. (Only a bottom tape existence )

図1 ﾁｯﾌ1ﾟ詰.1め1 R状e態el is made by resin and appeaser and dime(単ns位io：nmmis)shown in Fig 2.

There are possibly to change the material and dimension due to some impairment.

1.12 Peeling off force : 0.1N to 0.6N* in the direction as shown below.

* GRM01/02/03:0.05N～0.5N

165～180°

Top tape

1.13 Label that show the customer parts number, our parts number, our company name, inspection

number and quantity, will be put in outside of reel.

JEMCGP-01796E

11

Share Link: