S-24C64C データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

S-24C64C

2-WIRE SERIAL E2PROM

Unspecified 

2-WIRE SERIAL E2PROM

S-24C32C/64C

 Operation

1. Start Condition

Start is identified by a high to low transition of the SDA line while the SCL line is stable at high.

Every operation begins from a start condition.

Rev.4.0_03_H

2. Stop Condition

Stop is identified by a low to high transition of the SDA line while the SCL line is stable at high.

When a device receives a stop condition during a read sequence, the read operation is interrupted, and the device

enters standby mode.

When a device receives a stop condition during a write sequence, the reception of the write data is halted, and the S-

24C32C/64C initiates a write cycle.

tSU.STA tHD.STA

tSU.STO

SCL

SDA

Start Condition

Figure 10 Start / Stop Conditions

Stop Condition

10

Share Link: