AZ954Y-1C-12DM データシートの表示（PDF） - Zettler Electronics
部品番号
コンポーネント説明
メーカー
AZ954Y-1C-12DM Datasheet PDF : 2 Pages
| |||
AZ954
SUBMINIATURE
POWER RELAY
FEATURES
• Subminiature size for high density packaging
• Coil sensitivity to 114 mW
• Extremely low cost
• Coils to 24 VDC
• Epoxy sealed version available
• 2 Amp contacts
• Life expectancy to 10 million operations
• UL, CUR file E43203
CONTACTS
Arrangement SPDT (1 Form C)
Ratings
Light Duty
Medium Duty
Material
Resistive load:
Max. switched power: 30 W or 125 VA
Max. switched current: 1 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 1 A at 125 VAC General Use
1 A at 30 VDC Resistive
Max. switched power: 30 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC* or 300 VAC
UL Rating: 2 A at 125 VAC General Use
1 A at 30 VDC Resistive.
Silver nickel, gold clad
Resistance
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max Continuous
Dissipation
Temperature Rise
Max. Temperature
0.45W coil: 253 mW
0.36W coil: 203 mW
0.2W coil: 114 mw
0.8 W at 20°C (68°F) ambient
At nominal coil voltage:
0.45W coil: 54°C (97°F)
0.36W coil: 44°C (79°F)
0.2W coil: 30°C (54°F)
130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 2 A 120 VAC Res.
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 1 ms at nominal coil voltage
(with no coil suppressions)
Dielectric Strength
1250 Vrms coil to contact
(at sea level for 1 min.) 750 Vrms between open contacts
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
0.45W: -25°C (-13°F) to 55°C (131°F)
0.36W: -25°C (-13°F) to 65°C (149°F)
0.2W: -25°C (-13°F) to 75°C (167°F)
0.062" (1.5 mm) DA at 10–55Hz
Shock
15 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
3.5 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-06-26
Share Link: 