Nonswitching electrical specifications
5.2.3 Voltage and current operating behaviors
Table 3. Voltage and current operating behaviors
Symbol
VOH
Description
Output high voltage — high drive strength
• 2.7 V ≤ VDD ≤ 3.6 V, IOH = -10 mA
• 1.71 V ≤ VDD ≤ 2.7 V, IOH = -3 mA
Min.
VDD – 0.5
VDD – 0.5
Max.
—
—
Unit
V
V
Output high voltage — low drive strength
• 2.7 V ≤ VDD ≤ 3.6 V, IOH = -2 mA
• 1.71 V ≤ VDD ≤ 2.7 V, IOH = -0.6 mA
VDD – 0.5
—
V
VDD – 0.5
—
V
IOHT
Output high current total for all ports
VOL
Output low voltage — high drive strength
• 2.7 V ≤ VDD ≤ 3.6 V, IOL = 10 mA
• 1.71 V ≤ VDD ≤ 2.7 V, IOL = 3 mA
—
100
mA
—
0.5
V
—
0.5
V
Output low voltage — low drive strength
• 2.7 V ≤ VDD ≤ 3.6 V, IOL = 2 mA
• 1.71 V ≤ VDD ≤ 2.7 V, IOL = 0.6 mA
—
0.5
V
—
0.5
V
IOLT
Output low current total for all ports
IIN
Input leakage current (per pin)
• @ full temperature range
• @ 25 °C
—
100
mA
—
TBD
μA
—
TBD
μA
IOZ
Hi-Z (off-state) leakage current (per pin)
RPU
Internal pullup resistors
RPD
Internal pulldown resistors
1. Measured at Vinput = VSS
2. Measured at Vinput = VDD
—
TBD
μA
20
50
kΩ
20
50
kΩ
Notes
1
2
5.2.4 Power mode transition operating behaviors
All specifications except tPOR and VLLSx-RUN recovery times in the following table
assume this clock configuration:
• CPU and system clocks = 50 MHz
• Bus clock (and flash and Mini-FlexBus clocks) = 25 MHz
MCF51JF128 Advance Information Data Sheet, Rev. 2, 05/2011.
12
Preliminary
Freescale Semiconductor, Inc.