DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

74ABT541 データシートの表示(PDF) - Fairchild Semiconductor

部品番号
コンポーネント説明
メーカー
74ABT541
Fairchild
Fairchild Semiconductor Fairchild
74ABT541 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Skew
SOIC package.
Symbol
tOSHL(13)
tOSLH(13)
tPS(14)
tOST(13)
tPV(15)
Parameter
Pin to Pin Skew, HL Transitions
Pin to Pin Skew, LH Transitions
Duty Cycle, LH/HL Skew
Pin to Pin Skew, LH/HL Transitions
Device to Device Skew, LH/HL
Transitions
TA = –40°C to +85°C,
VCC = 4.5V to 5.5V,
CL = 50pF,
8 Outputs
Switching(11)
Max.
1.3
1.0
2.0
2.0
2.0
TA = –40°C to +85°C,
VCC = 4.5V to 5.5V,
CL = 250pF,
8 Outputs
Switching(12)
Max.
2.3
1.8
3.5
3.5
3.5
Units
ns
ns
ns
ns
ns
Notes:
11. This specification is guaranteed but not tested. The limits apply to propagation delays for all paths described
switching in phase (i.e., all LOW-to-HIGH, HIGH-to-LOW, etc.)
12. These specifications guaranteed but not tested. The limits represent propagation delays with 250pF load capacitors
in place of the 50pF load capacitors in the standard AC load.
13. Skew is defined as the absolute value of the difference between the actual propagation delays for any two separate
outputs of the same device. The specification applies to any outputs switching HIGH-to-LOW (tOSHL), LOW-to-HIGH
(tOSLH), or any combination switching LOW-to-HIGH and/or HIGH-to-LOW (tOST). The specification is guaranteed
but not tested.
14. This describes the difference between the delay of the LOW-to-HIGH and the HIGH-to-LOW transition on the same
pin. It is measured across all the outputs (drivers) on the same chip, the worst (largest delta) number is the
guaranteed specification. This specification is guaranteed but not tested.
15. Propagation delay variation for a given set of conditions (i.e., temperature and VCC) from device to device. This
specification is guaranteed but not tested.
Capacitance
Symbol
CIN
COUT(16)
Parameter
Input Capacitance
Output Capacitance
Conditions
TA = 25°C
VCC = 0.0V
VCC = 5.0V
Note:
16. COUT is measured at frequency of f = 1 MHz, per MIL-STD-883, Method 3012.
Typ.
5.0
9.0
Units
pF
pF
©1992 Fairchild Semiconductor Corporation
74ABT541 Rev. 1.4
6
www.fairchildsemi.com

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]