LFECP10E-5F484C データシートの表示（PDF） - Lattice Semiconductor
部品番号
コンポーネント説明
メーカー
LFECP10E-5F484C Datasheet PDF : 163 Pages
| |||
Lattice Semiconductor
Architecture
LatticeECP/EC Family Data Sheet
decoders. These complex signal processing functions use similar building blocks such as multiply-adders and mul-
tiply-accumulators.
sysDSP Block Approach Compared to General DSP
Conventional general-purpose DSP chips typically contain one to four (Multiply and Accumulate) MAC units with
fixed data-width multipliers; this leads to limited parallelism and limited throughput. Their throughput is increased by
higher clock speeds. The LatticeECP, on the other hand, has many DSP blocks that support different data-widths.
This allows the designer to use highly parallel implementations of DSP functions. The designer can optimize the
DSP performance vs. area by choosing an appropriate level of parallelism. Figure 2-18 compares the serial and the
parallel implementations.
Figure 2-18. Comparison of General DSP and LatticeECP-DSP Approaches
Operand
A
Operand
B
Single
Multiplier
x
Operand
A
Operand
A
Operand
B
Operand
B
M loops
x x Multiplier 0
Multiplier 1
Operand
A
Operand
B
x
Multiplier
(k-1)
m/k
loops
Σ Accumulator
Function implemented in
General purpose DSP
Σ Accumulator
Output
Function implemented
in LatticeECP
sysDSP Block Capabilities
The sysDSP block in the LatticeECP-DSP family supports four functional elements in three 9, 18 and 36 data path
widths. The user selects a function element for a DSP block and then selects the width and type (signed/unsigned)
of its operands. The operands in the LatticeECP-DSP family sysDSP Blocks can be either signed or unsigned but
not mixed within a function element. Similarly, the operand widths cannot be mixed within a block.
The resources in each sysDSP block can be configured to support the following four elements:
• MULT
(Multiply)
• MAC
(Multiply, Accumulate)
• MULTADD
(Multiply, Addition/Subtraction)
• MULTADDSUM (Multiply, Addition/Subtraction, Accumulate)
The number of elements available in each block depends on the width selected from the three available options x9,
x18, and x36. A number of these elements are concatenated for highly parallel implementations of DSP functions.
Table 2-1 shows the capabilities of the block.
2-15
Share Link: 